Timer Programming - Logik L39FE12 Instruction Manual

Timer Programming

This function is used to perform scheduled recording.
The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast
programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the GUIDE button on the remote control. The EPG menu will appear.
GB
2. Press the RED button on the remote control while on the selected
programme, the RECORDER menu will be displayed. Press the
buttons to select the settings in the RECORDER menu for the Channel, Start
time, End time and Mode.
Channel
Start time
(for Mode Once,
Every Day,
Weekly)
End time
(for Mode Once,
Every Day,
Weekly)
Mode
3. After finishing all the recorder adjustments, press the OK button to confirm
your settings.
• After confirmation, you can press the GREEN button to view
your scheduled recording in the Schedule list.
• If a programme recording starts when the TV is in standby
mode, the LED indicator will flash red and blue.
48
L39FE12_IB_120524_Glo.indd 48
Press the buttons to select the channel that you
wanted to record.
Press the buttons to select the Minutes / Hour
/ Month / Date and then press the
adjust the start time.
Press the buttons to select the Minutes / Hour
/ Month / Date and then press the
adjust the end time.
Press the buttons to select the Auto / Once /
Every Day / Weekly.
PROGRAMME GUIDE
17 Jan 2011 22:07
DTV
800 France 2
801 France 4
802 France 5
803 ARTE
804 LCP
805 France 3
EXIT
Info
buttons to
OK
buttons to
801 SZTVM02
15:55-16:25 Movie 1
17 Jan
16:00 17:00
Information
Movie 1
Programme 2
Programme 3
Programme 4
Programme 5
Record Schedule Date Reminder OK
RECORDER
_
+
802 SZTVM03
Start Time
59 Minute
19 Hour
Dec Month
29 Date
End Time
29 Minute
20 Hour
Dec Month
29 Date
Mode AUTO
BACK
24/05/2012 5:23 PM