Lock Setting; Lock System; Channel Locks - Logik L20HE15 Instruction Manual

Lock Setting

To access the Lock System menu, you must enter the password. Enter the default password "0000" for first time use. To change
the password, refer to "New Password" (see below).

Lock System

The Lock System is designed to prevent accidental re-tuning of the TV / losing of channels and to prevent children from watching
unsuitable programmes.
The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered
when you access channel locks, rated programme and first time setup, also all buttons on the TV will be locked.
1. Press the MENU button to display the main menu. Press the
to select the Lock System and then press the
button.
GB
2. Press the
to input a 4-digit password to enter the Lock System menu.
The default password is "0000".
If you change the password, be sure to remember the new
password! If you forget the new password, enter the master
password"8899".
3. Press the
On / Off.
If the Enable is set to On, a valid password must be entered when you access
Auto Tuning / Manual Tuning / Channel Edit / Favourite Manager / Restore
Factory Default.
4. Press the MENU button to return to the previous menu, press again to return
to the main menu.
5. Press the EXIT button to exit the menu.

Channel Locks

Block Channel is designed to prevent children from watching unsuitable programmes.
When a channel is blocked, a valid password must be entered.
1. Press the MENU button to display the main menu. Press the
to select the Lock System and then press the
button.
32
buttons to select the Enter Password. Use the 0-9 buttons
buttons to select Enable and then the
buttons
button or the OK
buttons to select
buttons
button or the OK
Lock System
Enter Password
– – – –
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
– – – –
Clear Lock
Move MENU: Return EXIT: Exit
Lock System
Enter Password
– – – –
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
– – – –
Clear Lock
Move 0~9: Input MENU: Return
Lock System
Enter Password
– – – –
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
– – – –
Clear Lock
Move 0~9: Input MENU: Return
Lock System
Enter Password
– – – –
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
– – – –
Clear Lock
Move MENU: Return EXIT: Exit
Off
None
Off
Off
None
Off
EXIT: Exit
Off
None
Off
EXIT: Exit
Off
None
Off