Locomotive Switch Locations - Lionel AC6000 Owner's Manual

Locomotive basics

Locomotive switch locations

T
he functions of your locomotive's switches are outlined below. Refer to Figure 4 for the location
of the switches. The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and locomotive sets.
Smoke Unit Switch (SMK/NO SMK)
Used to turn the smoke unit function on and off.
Program-Run Switch (RUN/PGM)
Used to assign an ID# and to reprogram the locomotive for LEGACY and Command operation
when the switch is in the PGM position.
Radiator
hatch
Figure 4. Locomotive switch locations
Smoke unit
On/Off switch
8
Command reverse unit
switch