Locomotive Diagnostics - Lionel AC6000 Owner's Manual

Maintaining and servicing your locomotive

Locomotive diagnostics

Y
our locomotive includes built-in diagnostics to monitor the condition of the smoke system. If a
problem is detected, the locomotive's cab light will blink a diagnostic code.
If you see the light inside the cab flashing, press RESET (for LEGACY operation), 0 (for
TMCC operation), or DIRECTION/power interruption (for conventional operation to attempt
to clear the problem. The locomotive will immediately check itself again. If the problem
persists, the cab light will blink the code again.
Note that smoke-related errors can be reset a maximum of three times. On the third try,
if the problem still persists, the smoke unit will be shut down and must be returned to Lionel
Service for repair.
Turning the smoke unit switch to the off position will disable diagnostic checks of
the smoke system.
Note!
Number of Blinks
1
2
3
4
5
Diagnostic Code Description
Not applicable.
Smoke 1 element problem.
Smoke 1 fan problem.
Not applicable.
Not applicable.
19