Assigning Your Locomotive A New Id# (Legacy And Tmcc) - Lionel AC6000 Owner's Manual

Locomotive basics
Assigning your locomotive a new ID#
F
or operation in the LEGACY or TMCC environment, you will want to give each unit a unique
ID#. The locomotive will respond to commands associated with its ID# while all other units will
disregard these commands. This procedure is not necessary for conventional (non-
Command) operation.
1. Slide the Command reverse unit switch on your locomotive to the PGM
position. See Figure 4 on page 8.
2. Place the locomotive on the track.
3. Connect the Command Base and plug it in.
4. Power up the track.
5. Press ENG on the CAB-1 or CAB-2 remote.
6. Enter the unique ID#. Choose any number from 1 to 98 that has not been
assigned to another locomotive (ENG). We recommend using a part of your
locomotive's road number.
All LEGACY locomotives respond to ENG 99. We recommend that you reserve ID# 99 as a
Note!
"universal" ID#.
7. Press SET. The locomotive's headlights will flash.
8. Slide the Command reverse unit switch back to the RUN position.
The locomotive's ID# has been set. Be sure to record the new ID# for your reference.
9