Control And Functional Elements On Microscope; Stand Models; Stand For Transmitted Light - Ryf Axio Lab.A1 Operating Manual

Carl Zeiss
2.4

Control and functional elements on microscope

2.4.1

Stand models

Five stand models are available in the delivery program:
1. Transmitted light stand for biomedical applications in brightfield, darkfield and phase contrast
2. Transmitted light stand for biomedical applications in brightfield, darkfield, phase contrast and
polarization
3. Transmitted and reflected light stand for biomedical applications in brightfield, darkfield, phase
contrast, polarization (transmitted light) and fluorescence (reflected light)
4. Reflected light stand for material applications in brightfield, darkfield, phase contrast, polarization
and C-DIC
5. Transmitted light stand for material applications in brightfield, darkfield, phase contrast, polarization,
conoscopy
In addition, the delivery program also includes two TÜV certificates, "Ergonomically tested" stand
models.
A TÜV certificate of ergonomics was prepared for the light microscope in cooperation with occupational
health physicians and the TÜV Rheinland and granted for the following two basic configurations:
Transmitted light stand with ergo stage and comfortable ergonomic tube
Reflected light fluorescence stand with ergo stage and comfortable ergo tube
2.4.2

Stand for transmitted light

Key to Fig. 2-1:
1 Basic stand
2 Stage carrier for mechanical stages
3 Light intensity control
4 Focusing drive – fine adjustment (right side, finger wheel)
5 Focusing drive – coarse adjustment (right side)
6 Drive knob for mechanical stage adjustment in X direction
7 Drive knob for mechanical stage adjustment in Y direction
8 Drive knob for vertical adjustment of condenser (right side)
9 Centering screw for condenser (right side)
10 Luminous-field diaphragm
11 Condenser with aperture diaphragm (optional with modulator disk)
12 Mechanical stage 75x30 (optionally for right- or left-hand operation or with ergo-drive right) with specimen holder
13 Nosepiece 5x H
14 Slot for 6x20 slider
15 Eyepieces
16 Binocular section of tube
17 Binocular tube/photo tube
18 Carrying handle
19 Centering screw for condenser (left side)
20 Drive knob for vertical adjustment of condenser (left side)
21 Focusing drive – coarse adjustment (left side)
22 Focusing drive – fine adjustment (left side)
23 ON/OFF switch
24 Transmitted light lamp in stand base
25 Tool flap/cable holder
26
DESCRIPTION OF THE INSTRUMENT
Control and functional elements on microscope
430037-7144-001
Axio Lab.A1
04/2013