Safety Precautions - Clarke JETSTAR 1800 Operating & Maintenance Instructions

SAFETY PRECAUTIONS

Water at high pressure can be dangerous and may cause severe damage
to persons or property if subject to misuse.
NEVER allow anyone to operate this equipment unless they are thoroughly
reliable, and completely familiar with the safety precautions.
1. Never direct the spray jet at
any person or animal.
2. Never hold a finger over the
high pressure nozzle.
3. Never direct the spray jet at the
machine itself or any other
electrical equipment.
4. After use, and before disconnecting hoses, release the pressure in the
high pressure hose by operating the trigger. Do not attempt to
disconnect any hose or coupling with pressure still in the hose.
5. Never operate the machine with any of the covers removed.
6. Do not, attempt any electrical or mechanical repair. If you have a
problem with your machine contact your local dealer or Clarke
Customer Services Dept., tel: 020 8988 7400
7. Never supply any liquid other than CLEAN water to the water inlet.
8. Use only chemical cleaning agents (detergents) approved for power
washing when using the foam lance.
9. Never use the foam lance to introduce solvents eg. paint thinners,
petrol, oil, etc.
10. Do not operate the machine whilst standing on ladders: use a platform
tower or scaffolding.
11. Children should not be allowed to use the machine.
12. We recommend the use of safety goggles when using machine with
sand blasting attachment (optional accessory - see Page 13), or any
application where loose particles of stone or grit etc. may be blown
around by the high pressure spray.
WARNING!
4