Remote control JIG
Ref. No.
Part No.
–––
–––
JG176
APJG176112
1.
Turn on the power.
Open the DVD tray.
2.
Place the Up-Date Disc and close the tray. (Refer to SERVICING FIXTURE AND TOOLS)
3.
The reading will start and the Fig. 1 screen will appear.
Upgrade File DETECTED
Upgrade?
Press Play To Start
Fig. 1
Press the PLAY key on the set.
4.
The data reading will start.
And, "File Copying" appears on the TV monitor.
After the finishing of the data reading, tray will open automatically.
The display will change to "CLEAR".
5.
Remove the Up-Date Disc.
CHECK FOR THE FIRMWARE VERSION
6.
Turn on the power, then press "CHECK SUM" key on the remote control JIG for more than 1 second.
Firmware version will be displayed on the screen.
When the changed version displays, the Re-write will be completed.
AREA: WY
ROM NUMBER
YEB6420A
REG CHK
10
SUM CHK
02A5
FL VERSION
1.16
CHIP VERSION
1389FE
Fig. 2
7.
Turn off the power
SERVICING FIXTURES AND TOOLS
JG176 Up-Date Disc
Parts Name
Remote control JIG
Up-Date Disc
RE-WRITE FOR DVD FIRMWARE
REAGION: 1
Y E B 6 4 2 0 A
Fixed
Check for the Firmware version
Up-Date of the Firmware
Up-Date of the Firmware
Released times on the same date
Release date (Example: 2006.4.20)
C-1
Remarks
A = October
B = November
C = December