Onkyo DV-SP404 Service Manual page 60

FIRMWARE DOWN LOADING
Confirm the Regional code and Firmware version.
1. Connect the TV monitor to the DV-SP404.
2. Turn ON the standby switch ON. (No Disc)
3. Press "SET UP" key of remote controller (RC-616DV).
Appear a HOME MENU. (Photo-1)
4. Select "Initial Settings" menu and press "ENTER".
5. Select "Options" menu, and press the "DISPLAY" button.
6. Appear regional code and firmware ROM number.
Confirm the regional cord and firmware version.
When close the menu, press "RETURN" button of
(Photo-2)
the unit.
Down load the firmware
1. Newest FW is written in CD-R with a
personal computer.
2. Pees "Standby" button and "Disc Tray" button.
3. Set the CD-R on the Disc tray and press "Play" button.
Waiting 2 seconds and open the tray automatically.
DISC TRAY waits for about 2 minutes in
the tray open condition.
Cautions: Do not close the disc tray.
Close the tray automatically.
4. Press "Standby" button. (Off)
5. Press "Standby" button (On).
Confirm the regional code and firmware version at above method.
Writing CD-R of upgraded FW.
1. Download the newest firmware.
ex: YEB6704AB4DA.BIN
2. Volume label name is "PIONEER"
6. Set the disc on the tray and press play key.
7. Open the tray (Automatically) and remove the disc and waiting about 30 second
then close the tray (automatically).
It is displayed in the FL tube, "NO DISC".
Regional code
ROM Version
Most new Ver. YEB6704A
Volume label
PIONEER
Upgrade File DETECTED
Upgrade ?
Press Play To Start
Upgrade File DETECTED
Upgrade ?
Press Play To Start
File Copy UPGRADING
HOME MENU
DVD
Audio Settings
Play Mode
IMAGINATIVE SIGHT & SOUND
Initial Settings
Make advanced settings
Move
Select
ENTER ENTER
(Photo-1)
Initial Settings
Digital Audio OUT Parental Lock
Video Output DivX VOD
Language
Display
Options
REGION 2
ROM VERSION : YEB6420A
Select
Move
ENTER
(Photo-2)
Firmware data
YEB6704A.BIN
Video Adjust
Disc Navigator
R
Setup Navigator
Exit
HOME MENU
Off(us)
Exit
HOME MENU