Starting Projection; Starting And Stopping Projection; Stopping Projection; When The Language Selection Screen Appears - Canon WUX450 User Manual

Starting Projection

Starting and Stopping Projection

■ Starting Projection
Press the POWER button on the remote control or on the projector.
The [POWER ON] indicator initially flashes green, after which it remains lit.
Remote control Projector

■ Stopping Projection

Press the POWER button on the remote control or on the projector twice.
Remote control Projector

■ When the Language Selection Screen Appears

A screen appears when the projector is turned on for the first time. You can select a
language to be used by the projector for displaying menus and messages in the
window. Select the desired language with the pointer buttons and press the OK
button.
You can change the language from the menu at a later time. (P115)
If the language selection screen is out of focus, adjust the focus. (P59)
Remote control Projector
An item highlighted in orange will be selected.

■ When the Password Input Screen Appears

If you have set a password, the password input screen appears. Enter your
password. (P116)
144