Specifying Standby Power Consumption; Viewing The Ip Address - Canon WUX450 User Manual

Completing Projector Settings
Specifying Standby
Power Consumption
> [Network settings] >
standby settings]
Specify network function operating
status in standby mode as follows.
Normal All network functions are available
even in standby mode, including
the web screen, control over the
network, and PJLink.
Low- All network functions are available
power even in standby mode.
However, the projector may be
less responsive than usual when
some functions are initially used.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Low-power] is the factory default.
• [Low-power] may delay access over the
network for some functions. For faster
access, select [Normal].
• Power consumption when [Network function
(wired)] is [On] varies depending on
whether [Network standby settings] is set to
[Normal] or [Low-power].
Viewing the IP
Address
[Network
View the projector's IP address as
follows.
Note that the information can only be
displayed, not changed.
To change the settings, access the
DHCP or TCP/IP settings.
172
> [Network settings] > [Detailed settings
(wired)] > [IP address]