Download Print this page

Hitachi HIT-FHD6500PC Touch User Manual page 36

65’’ interactive monitor
Hide thumbs


Please follow the installation instructions carefully as failure to do so may result in injury
or damage to the set.
If you do not feel confident in carrying out the installation yourself, please ask a
specialist installer to carry out the installation for you.
Use appropriate wall anchors for the wall on which the interactive monitor will be
mounted. If you are unsure which anchors to use, please seek professional advice.
To avoid potential injury it is advisable to have assistance from another person to carry
out this installation.
Hitachi assumes absolutely no responsibility for injuries or damage that may occur due to
improper installation and handling.
Safety Precautions
Please read the following recommended safety precautions carefully for your safety.
This equipment has been designed and manufactured to meet international safety standards but, like
any electrical equipment, care must be taken if you are to obtain the best results and safety is to be
DO read the operating instructions before you attempt to use the equipment. DO ensure that all
electrical connections (including the mains plug, extension leads and inter-connections between the
pieces of equipment) are properly made and in accordance with the manufacturer's instructions.
Switch off and withdraw the mains plug before making or changing connections. DO consult your
dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to
excessive wear and tear or heat.
DON'T remove any fixed cover as this may expose dangerous voltages. DON'T obstruct the
ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the equipment. DON'T allow electrical
equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be
placed on the equipment.
DON'T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety
always fit the manufacturer's approved stand or legs with the fixings provided according to the



  Related Manuals for Hitachi HIT-FHD6500PC Touch