Figure 160 Bandwidth Manager: Class Setup; Table 115 Bandwidth Manager: Class Setup - ZyXEL Communications ZyWall 35 User Manual

Figure 160 Bandwidth Manager: Class Setup

The following table describes the labels in this screen.

Table 115 Bandwidth Manager: Class Setup

LABEL
Class Setup
Interface
Bandwidth
Management
Add Sub-Class
Edit
Delete
Statistics
Filter List
#
Filter Name
Service
Chapter 20 Bandwidth Management
DESCRIPTION
Select an interface from the drop-down list box for which you wish to set up classes.
This field displays whether bandwidth management on the interface you selected in
the field above is enabled (Active) or not (Inactive).
Click Add Sub-class to add a sub-class.
Click Edit to configure the selected class. You cannot edit the root class.
Click Delete to delete the class and all its sub-classes. You cannot delete the root
class.
Click Statistics to display the status of the selected class.
This list displays the bandwidth management filters that are configured for the
classes on the selected interface. The ZyWALL applies the bandwidth management
filters in the order that they appear here. Once a connection matches a bandwidth
management filter, the ZyWALL applies the rules of the corresponding bandwidth
management class and does not check the connection against any other bandwidth
management filters.
This is the index number of an individual bandwidth management filter.
This is the name that identifies a bandwidth management filter.
This is the service that this bandwidth management filter is configured to manage.
ZyWALL 35 User's Guide
329