Internet Access Wizard Setup Complete; Figure 16 Internet Access Wizard Setup Complete - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide
Table 12 ISP Parameters : PPTP Encapsulation
LABEL
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address
Connection ID/
Name
WAN IP Address
Assignment
IP Address
Assignment
My WAN IP
Address
First DNS Server
Second DNS
Server
Finish

3.2.2 Internet Access Wizard Setup Complete

Well done! You have successfully set up your ZyWALL to operate on your network and
access the Internet.

Figure 16 Internet Access Wizard Setup Complete

78
ESCRIPTION
D
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Click Finish to complete and save the wizard setup.
Chapter 3 Wizard Setup