Spillover; Figure 49 Load Balancing: Weighted Round Robin; Table 40 Load Balancing: Weighted Round Robin - ZyXEL Communications ZyWall 35 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 35:

Table of Contents

The following table describes the related fields in this screen.

Active/Active

Load Balancing

Interface This field displays the name of the WAN interface (WAN1 and WAN2).

Ratio Specify the weighted ration for the interface. Enter 0 to set the ZyWALL not to send

7.7.3 Spillover

To load balance using the spillover method, select Spillover in the Load Balancing

Algorithm field.

Configure the Route Priority metrics in the WAN General screen to determine the primary

and secondary WANs. By default, WAN1 is the primary WAN and WAN2 is the secondary

Chapter 7 WAN Screens

Select Active/Active Mode and set the related fields to enable load balancing on the

Select a load balancing method to use from the drop-down list box.

traffic load to the interface.

ZyWALL 35 User's Guide