I Set Mode Items - Icom IC-M601 Instruction Manual

8
SET MODE

I Set mode items

D D Scan type
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
--Set Mode--
Scan Type
˘Priority
˘Normal
˘All Ships Call
˘Position Request
˘Polling Request
<ENT˘OK>
D D Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been re-
ceived on channels except for Channel 16.
--Set Mode--
Scan Timer
˘ON
˘OFF
˘All Ships Call
˘Position Request
˘Polling Request
<ENT˘OK>
38
D D Dual/Tri-watch of COMMANDMIC
This item sets the HM-134's [DUAL•IC] switch function as
dual watch or tri-watch.
(Default: Normal)
D D Beep tone
You can select silent operation by turning beep tones OFF, or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON.
(Default: OFF)
(Appears when connecting HM-134)
--Set Mode--
Dual/Tri COMMANDMIC
˘Tri-watch
˘Dualwatch
˘OFF
˘Position Request
˘Polling Request
˘<ENT˘OK>
--Set Mode--
Beep
˘ON
˘OFF
˘OFF
˘Position Request
˘Polling Request
˘<ENT˘OK>
The optional HM-134 has it's own setting for the beep tone.
(Default: Dualwatch)
(Default: ON)