Set Mode; I Set Mode Programming - Icom IC-M601 Instruction Manual

I Set mode programming

Set mode is used to change the conditions of the trans-
ceiver's functions: scan type (normal or priority), scan resume
timer, dual/tri-watch of COMMANDMIC, transceiver's beep
tone, internal speaker, LCD contrast and automatic foghorn
frequency.
Available functions may differ depending on dealer setting.
• SET MODE CONSTRUCTION
Rotate [CHANNEL]

--Set Mode--

˘Scan Type
˘Scan Timer
˘Dual/Tri COMMANDMIC
˘Beep
˘Internal Speaker
˘Contrast
˘Foghorn Frequency
˘Exit
q Turn power OFF.
w While pushing [16•C], turn power ON to enter set mode.
e After the display appears, release [16•C].
r Rotate [CHANNEL] to select the desired item, push [ENT].
Or push [16•C] to select the item when using an optional
HM-134.
t Rotate [CHANNEL] to select the desired condition of the
item. Use [Y]/[Z] when using an optional HM-134.
y Rotate [CHANNEL] to select "Exit," push [ENT] to exit
set mode and returns to normal operation condition
Push when using HM-134
Scan type
Scan type
Foghorn Foghorn
Internal Speaker
not selectable when using HM-134.
LCD contrast Beep tone
Contrast Beep
SET MODE
Scan resume timer
Scan timer
Frequency Frequency
and
items are
Dual/tri-watch of COMMANDMIC
Dual/Tri COMMANDMIC
8
7
8
37