Icom IC-M601 Instruction Manual page 57

r VOLUME INDICATOR (p. 53)
Appears while audio output level is adjusted.
t SQUELCH INDICATOR (p. 53)
Appears while noise squelch level is adjusted.
y CHANNEL COMMENT INDICATOR
➥ Channel comment appears (and scrolls) if programmed.
(pgs. 11, 58)
➥ In set mode, indicates or scrolls the selected set mode
item. (pgs. 37, 57)
u SCAN INDICATOR (pgs. 15, 55)
➥ "SCAN" appears during normal scan.
➥ "P SCAN" appears during priority scan.
i PRIORITY CHANNEL INDICATOR
➥ Indicates a priority channel during priority scan or
dual/tri-watch. (pgs. 13, 56)
➥ "IC" appears during intercom mode. (pgs. 36, 58)
o DUAL/TRI WATCH INDICATOR (pgs. 13, 56)
"DUAL" appears during dualwatch; "TRI" during tri-watch.
!0 LOW POWER INDICATOR (pgs. 10, 53)
Appears when low power is selected.
!1 CALL CHANNEL INDICATOR (pgs. 8, 52)
Appears when the call channel is selected.
HM-134 REMOTE-CONTROL MICROPHONE
!2 DUPLEX INDICATOR (pgs. 9, 52)
Appears when a duplex channel is selected.
!3 TAG CHANNEL INDICATOR (pgs. 15, 56)
Appears when a tag channel is selected.
!4 BUSY INDICATOR (pgs. 10, 53, 54)
Appears when receiving a signal or when the squelch
opens.
!5 TRANSMIT INDICATOR (pgs. 10, 53)
Appears while transmitting.
!6 "WAIT" INDICATOR
"WAIT" appears in the HM-134 display while transmitting
via the IC-M601's attached microphone.
• In the above case, the connected HM-134 does not have prior-
ity.
13
13
51