Expert Adjustment - Oce cm3521 User Manual

12

Expert Adjustment

Parameter
AE Level Adjustment
Printer Ad-
justment
Finisher
Adjust-
ment
12-30
Description
Set the initial value for auto exposure be-
tween 0 and 4. The higher the setting,
the more that the original background is
emphasized.
Leading Adjust the starting print position be-
Edge tween –3.0 mm and 3.0 mm at the lead-
Adjust- ing edge of the paper (with respect to the
ment paper feed direction). Adjustments can
be specified for each paper type.
Centering Adjust the starting print position be-
tween –3.0 mm and 3.0 mm at the left
edge of the paper (with respect to the
paper feed direction). Adjustments can
be specified for each paper tray.
Centering Adjust the starting print position be-
(Duplex tween –3.0 mm and 3.0 mm at the left
2nd Side) edge of the paper for the second side
during automatic double-sided copying.
Adjustments can be specified for each
paper tray.
Media Ad- If the print image is flawed (missing print,
justment white spots, or uneven printing) due to
the characteristics of the type of paper
that is used, adjust this parameter be-
tween –5 and +5 according to the paper
type.
Erase The width of the area erased from the
Leading leading edge (margin) can be adjusted to
Edge 4 mm, 5 mm, or 7 mm. For details on
making this adjustment, contact your
technical representative.
Center Adjust the center stapling position be-
Staple tween –10 mm and 10 mm for printing
Position with the "Fold & Staple" setting.
Fold Posi- Adjust the center folding position be-
tion tween –10 mm and 10 mm for printing
with the "Half Fold" setting.
Punch Adjust the horizontal position of the
Horizontal punched holes between –10 mm and
Position +10 mm.
Punch Re- The hole-punching shift for double-sided
sist Loop printing and outputting cover pages can
Size be adjusted in 1 mm increments.
Utility
Default Setting
2 (standard)
0.0 mm
0.0 mm
0.0 mm
–
4 mm
0
0
0 mm
0 mm
cm3521