Oce cm3521 User Manual page 624

Appendix
F
Fold & Staple
Set this function to fold the copies in half and staple them together at the
center.
Finishing
Select from the settings that are available for sorting and finishing copies
when they are fed into the finishing tray.
G
Glossy
Select this setting for an improved glossy finish of images.
Green
Set this parameter to adjust the level of green in the image, for example, if
you wish to emphasize the green of forests and trees.
Group
Select this setting to separate the copies of each page in the original. The
specified number of copies of the second page is printed after all copies of
the first page are finished.
H
Hue
Set this parameter to make the image either more reddish or more bluish.
I
Insert Image
Set this function to later scan multiple images from the original glass and in-
sert them at the desired locations in an original scanned with the ADF, then
feed out all copies together.
Insert Sheet
Set this function to insert paper from the specified paper tray into the copies
as chapter title pages.
M
Margin
Select the setting for the position of the binding margin for the loaded origi-
nal. Selecting the appropriate setting prevents the copy from being printed
upside-down when making double-sided copies from single-sided original or
when making single-sided copies from double-sided originals.
Memory Scan
Scans an original exceeding the maximum 100 pages that can be loaded into
the ADF by scanning the original in separate batches. The original can be
scanned and treated as a single copy job. In addition, the scanning location
can be switched between the original glass and the ADF during the scanning
operation.
cm3521
13
13-7