Oce cm3521 User Manual page 570

Hide thumbs Also See for cm3521:

Table of Contents

Touch [+] or [–] to adjust the setting between –5 and +5. An adjustment

is possible if the size of the white areas in missing print or the white

spots is 0.5 mm or less.

For missing print or

white spots in the

print image, touch [–]

to reduce the adjust-

For uneven printing

of the print image,

touch [+] to increase

the adjustment.

Each time [+] or [–] is

touched, the value is

increased or de-

creased by one in-

To cancel the adjust-

ment, touch [Cancel].

Touch [Exit].

Try performing the copy cycle again.

Check the printed image, and finish the adjustment if there are no

If more adjustment is necessary, repeat steps 1 through 9.

If the print image flaws are worse, adjust the setting in step 7 in the

opposite direction.

Troubleshooting