Related Manuals for Telstra WI-FI 4G ADVANCED II
Summary of Contents for Telstra WI-FI 4G ADVANCED II
- Page 1 GETTING TO KNOW YOUR TELSTRA WI-FI 4G ADVANCED II telstra.com/mbb 13 2200 visit a telstra store or partner...
- Page 2 LET’S GET THIS SHOW WHAT’S ON THE ROAD INSIDE Your Telstra Wi-Fi 4G Advanced II has Safety first been tested to the highest standards to Let’s get started deliver you the best possible coverage Getting connected and speed experience on the network without equal.
-
Page 3: Safety First
SAFETY FIRST Please read all the safety notices before using this Declaration of conformity – device. This device is designed to be used at least specific absorption rate (SAR) 20cm from your body. Do not use the device near Your device is designed to be used at least 20cm fuel or chemicals or in any prescribed area such as from the body. -
Page 4: Let's Get Started
STARTED Your package contains the following: You can also purchase the following accessories: • Telstra Wi-Fi 4G Advanced II device and battery • External antenna – improves performance in areas with low signal strength. See your local Telstra • This getting started guide store or partner for assistance with picking the •... - Page 5 Connections for an optional MIMO Dual TS-9 port external antenna to boost your signal. Antennas are 1. LCD touchscreen available from selected Telstra stores and partners. Capacitive touch screen with options to For information on the correct way to attach an manage device settings, data usage and antenna, see page 33.
- Page 6 The device indicator panel shows you the status Icons of your new Telstra Wi-Fi 4G Advanced II. Signal 1 bar – low level strength 5 bars – excellent Network type HSPA+ /DC HSPA Roaming Connected to a network other than Telstra’s Traffic Outline –...
- Page 7 Default Wi-Fi Case sensitive and is You need the following information to log on password displayed on the front to your Telstra Wi-Fi 4G Advanced II. (Security Key) screen of your device when powered on and under the battery. Wi-Fi home page http://m.home...
-
Page 8: Getting Connected
GETTING CONNECTED 1. Insert SIM card and battery (If you haven’t already) 2. Switch on your Telstra Wi-Fi 4G Advanced II • Remove the back cover using thumb catch on • Press and hold the Power key until the the bottom of the device and gently lift off. - Page 9 3. Search for wireless networks Searching for wireless networks • Check to make sure your computer or other device has Wi-Fi enabled and search for wireless networks. For Windows Click on the Internet Access icon, usually found on the Refer to the following table or your Wi-Fi enabled very bottom right of your device manual for further details on searching for screen.
- Page 10 • Using the touch screen, tap the Wi-Fi icon, then select WPS. • Within 2 minutes, press the WPS button on the device you want to connect to your Wi-Fi network Telstra Wi-Fi 4G Advanced II and the other device communicate with each other and establish the connection.
-
Page 11: Monitoring Data Usage
MONITORING DATA USAGE On-device data usage meter Device home page usage meter Your device includes an on-screen meter which The status bar at the top of your Wi-Fi home page displays the amount of estimated data used and shows a data usage meter similar to the one remaining days left in the current billing cycle. -
Page 12: Using The Lcd Touchscreen
USING THE LCD TOUCHSCREEN Wi-Fi Main Wi-Fi Change your Wi-Fi name (SSID) or Wi-Fi password (Security Key). Wi-Fi You can manage your Wi-Fi settings by selecting Dual-Band Wi-Fi Connect devices that support Dual-Band Wi-Fi the Wi-Fi icon. to transfer data faster. Guest Wi-Fi Set up a Guest Wi-Fi network for temporary users. - Page 13 Messages Messages The messages icon shows the unread SMS messages received by your device. • On the home screen, tap the Messages icon • Tap a message line to read the full message...
- Page 14 Settings Use the options on the Settings screen to customise your device: Settings Display Configure the touchscreen You can customise other settings as well. display (brightness, timeout, To customise your device’s settings: display of Wi-Fi credentials, • On the home screen, tap the Settings icon. status LED display).
- Page 15 Jump Boost Settings You can use your Telstra Wi-Fi 4G Advanced II to give a boost to another device’s battery using the Jump Boost cable provided with your device. To boost another device’s battery: • Plug the jump boost cable into your Telstra Wi-Fi 4G Advanced •...
-
Page 16: Home Page
WI-FI HOME PAGE Getting the most from your Wi-Fi home page You can manage your device settings and monitor data usage via your Wi-Fi home page. You can only The status bar at the top of the page shows icons access the Wi-Fi home page while connected to the displaying network, messages, connected users device’s Wi-Fi network or via USB tether. - Page 17 How to change Wi-Fi Password (security key) How to change Wi-Fi home page password and/or Wi-Fi Name (SSID) • Go to Settings • Select Wi-Fi from side panel • From the General tab input a new password • Select Options tab under Homepage heading •...
-
Page 18: Extra Features
EXTRA FEATURES Using an external antenna Software updates Using an external antenna may be recommended Updating your device software when updates are in areas of lower coverage to improve your device available helps to ensure your device continues to performance. MIMO Dual TS-9 antennas are give maximum performance. - Page 19 Manually checking for software updates International roaming To check for updates manually, tap Settings > You can use your Telstra Wi-Fi 4G Advanced II More > Software Updates. service while overseas. Any monthly allowance included with your Telstra plan excludes use •...
-
Page 20: Problem Solving
PROBLEM SOLVING Why can’t I connect? Frequently asked questions If you are having an issue accessing the internet try How do I go back to the Wi-Fi home page the following suggestions: (Web Interface)? Open your browser and type in http://m.home •... - Page 21 4G: 700/900/1800/2100/2600MHz 3G: 850/900/1900/2100 MHz be directed to Telstra at: Wi-Fi working range • General enquiries should be directed to Telstra Approx 25m radius in free space at livechat.telstra.com Wi-Fi connections Supports up to 10 users •...
-
Page 22: Extra Bits You Should Know
EXTRA BITS YOU SHOULD KNOW Data usage Coverage The Telstra Mobile Network offers 4G in all capital Notifications will not show usage and charges for CBDs and associated airports, many surrounding current sessions, and should be used as suburban areas and in over 100 regional areas.