Telstra MF910V User Manual
  1. Manuals
  2. Brands
  3. Telstra Manuals
  4. Modem
  5. MF910V
  6. User manual

Telstra MF910V User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TELSTRA 4GX WI-FI (MF910V)
USER
MANUAL
Copyright © 2016. All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on errors or
update specifications without prior notice.
The worst case simultaneous Wi-Fi and RF SAR result for this device is 1.918W/Kg
in the Body Position with 10mm separation.
Search 'ZTE Australia' on Facebook , Google+ and Twitter to keep in touch.
Version 1.0
Jan 2016
CHECK YOUR SYSTEM REQUIREMENTS
Your 4GX Wi-Fi will connect to any Wi-Fi enabled device that supports Wi-Fi
802.11 b/g/n
A web browser is required to log in to your Wi-Fi hotspot if you wish to make any
configuration changes.
USB driverless connection is also supported for Windows (not RT), and MAC
operating systems:
•
Windows 10, 8 (not including RT) / 7 / XP / Vista
•
MAC OS X 10.7 and above
Using the USB connection requires administrator rights to install and run the
software.
We suggest you switch off your anti-virus software before connecting the hotspot
- In some cases protection software can prevent automatic installation.
Page 1 of 31

Advertisement

Table of Contents
loading

Related Manuals for Telstra MF910V

Summary of Contents for Telstra MF910V

  • Page 1: User Manual

    TELSTRA 4GX WI-FI (MF910V) USER MANUAL Copyright © 2016. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

  • Page 2: Product View

    It is possible to start the installation process manually by clicking the Autorun icon when it appears. GET TO KNOW YOUR DEVICE Page 2 of 31...

  • Page 3: Insert Standard Sized Sim Card

    INSERT YOUR STANDARD SIZED SIM CARD This device supports a Standard sized SIM card ONLY (2FF). Do not use a microSIM or SIM card adaptor which may damage your device. The SIM card is pre-installed and needs to be activated. You may need this information if you need to replace or check your SIM card.

  • Page 4: Charge Wi-Fi Hotspot

    press the Reset button until the LED’s go out. A reset will restore all settings to factory default. Use the default Wi-Fi SSID and Password shown on the device sticker to log in via Wi-Fi. You can also connect directly to a computer using the USB lead provided, log into the web interface and access the Wi-Fi SSID and Password from the Wi-Fi Settings menu.

  • Page 5: Power Up Wi-Fi Hotspot

    • Physical damage to the charging port is not covered by warranty. • If the device is off while charging, press the power key as normal to switch on the device. • The device can be left always on and connected to the charger if required. •...

  • Page 6: Connect Devices By Wi-Fi

    CONNECT DEVICES BY WI-FI Your Wi-Fi hotspot can connect up to ten devices via Wi-Fi providing internet access for all your devices on the go. • On the devices you wish to connect make sure Wi-Fi is switched on, then search for Wi-Fi devices.

  • Page 7: Web Interface/Modem Homepage

    • The default login password is ‘password’ • The home page shows a brief summary of the device status and your remaining data from Telstra. • Software update notifications (if applicable) will be shown on this page as per the example above.

  • Page 8: No Network Access

    • Contact your carrier to discuss your data charges and roaming options. NETWORK LOCKED DEVICE • This device is network locked to Telstra. If you use an alternate carrier SIM you need to contact Telstra for the unlocking code. An unlocking fee may apply.

  • Page 9: Home Tab

    Windows users: Start > All Programs > TELSTRA 4GX WI-FI > Uninstall MAC Users: • Double click the Telstra Modem CDROM on the desktop to install the modem. • To uninstall, go to Applications and run Uninstall TELSTRA 4GX WI-FI...
  • Page 10 SETTINGS > QUICK SETTINGS Step through the Quick Settings wizard to quickly review your current default settings. Page 10 of 31...
  • Page 11 SETTINGS > NETWORK SETTINGS > WAN CONNECTION MODE: The default connection setting will automatically connect to the network. The setting is greyed out if you are connected. • Press the Disconnect button to change this setting and to enable International Roaming if required.
  • Page 12 • There is no need to change these settings unless you change service provider or are instructed by your carrier. • The modem is locked to Telstra. If you use a SIM card from another provider you may not be able to connect to the network.
  • Page 13 • There is no need to change these settings unless you change service provider or are instructed by your carrier. • The modem is locked to Telstra. If you use a SIM card from another provider you may not be able to connect to the network.
  • Page 14 SETTINGS > WI-FI SETTINGS > BASIC SETTINGS: The SSID is the Wi-Fi Network Name for your device • You can change the SSID to something more memorable or personal • You can hide the SSID broadcast so unknown users will not even see your network •...
  • Page 15 SETTINGS > WI-FI SETTINGS > ADVANCED SETTINGS • You can change the Wi-Fi settings to suit your personal choices or for specific requirements of your attached devices. • Press Apply to save your changes • Press the Help icon to get in context tips SETTINGS >...
  • Page 16 • WPS uses the push button on the front panel to connect seamlessly to supported devices. • Press WPS to enable, compatible devices can connect to your Wi-Fi network without authorisation, or you can set a PIN if required. • WPS is enabled for 2 minutes once pressed and the device LED’s will flash to indicate WPS mode.
  • Page 17 SETTINGS > DEVICE SETTINGS > USIM PIN MANAGEMENT: • Enter your current PIN code to change or disable the PIN • If you make any changes, press Apply to save the change • If you enter the incorrect PIN code three times in succession you will lock your SIM card.
  • Page 18 SETTINGS > DEVICE SETTINGS > POWER SAVE • If there is no Wi-Fi traffic detected then the device will switch off Wi-Fi as determined by the Wi-Fi sleep setting. • Set Wi-Fi sleep time to Never Sleep to keep the Wi-Fi always on. •...
  • Page 19 • Press the Update Now button to see if there are software updates for your device. • Roaming Settings control if the device will update when roaming. This is disabled to reduce high data charges when roaming. • Press the Help icon to get in context tips •...
  • Page 20 SETTINGS > FIREWALL > PORT FORWARDING • Select Enable to turn on the port forwarding settings. • Port forwarding can be used to allow a specific external server or computer access to devices located on your LAN side or to translate a specific incoming port into a different destination port.
  • Page 21 SETTINGS > FIREWALL > UPNP SETTINGS • Universal Plug and Play is a set of networking protocols that permits networked devices, such as personal computers, printers, Internet gateways, Wi-Fi access points and mobile devices to seamlessly discover each other's presence on the network and establish functional network services for data sharing, communications, and entertainment.
  • Page 22 SETTINGS > FIREWALL > DMZ • Enable the DMZ Setting to open up all ports from the WAN side (mobile network) to the LAN side for this particular allocated IP address. • It is advisable to set a Static IP address for this device outside of the DHCP range eg 192.168.0.20 •...
  • Page 23 SETTINGS > ROUTER SETTINGS • Control the IP Range for your network and enable or disable DHCP is required. • Press the Help icon to get in context tips SETTINGS > INTERNET WI-FI • Enable the Wi-Fi router to connect to another Hotspot to share that internet connection.
  • Page 24 • Internet Wi-Fi or the WAN side on your hotspot refers to the radio network connection. • When the Internet Wi-Fi Switch option is enabled, it is not possible to disconnect the RF WAN side. The Disconnect button is greyed out. This is because the Wi-Fi Switch function over-rides the manual disconnect feature.
  • Page 25 displayed in the main panel. • View SMS > SMS Settings to enable delivery reports and to check the SMS centre number (read from your SIM card) PHONEBOOK • Click Phonebook to view your SIM card contacts. • Contacts are automatically read into the device but you can also copy and save on your device.
  • Page 26 INFORMATION • View the device IMEI number, Signal strength and other details. • Change the SSID EXTERNAL ANTENNA PORTS • Signal strength can be improved by adding external antennas. • It is preferred to use both ports for best quality reception and service. •...
  • Page 27 products. • Insert and remove the connections carefully. Do not pull on the cable to remove the connection. The antenna ports are delicate and need to be treated with care. • Physical damage to the antenna port will render your device unusable and is not covered by the manufacturer’s warranty.

  • Page 28: Troubleshooting

    TROUBLESHOOTING If you have any problems with your connection or modem please consult the manual and check this section. If the problem still exists contact your service provider or check our website for more details at ztemobiles.com.au Problem Possible Causes Suggested Solution The user interface PC configuration is not...
  • Page 29 devices like hearing aids and pacemakers. Please keep the modem more than 20 centimetres away from such medical devices. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem near such devices. •...
  • Page 30 • At the end of life of the equipment, return the product to a suitable recycling agent such as Mobile Muster. RF SAFETY INFORMATION The Wi-Fi modem has an internal antenna. For optimum performance with minimum power consumption do not shield the device or cover with any object. Covering the antenna affects signal quality and may cause the modem to operate at a higher power level than needed.

  • Page 31: Technical Specifications

    TECHNICAL SPECIFICATIONS LTE 700, 1800, 2600 MHz UMTS 850, 2100 MHz Network compatibility GSM 900, 1800 MHz Chipset Qualcomm MDM9225 Dimensions 104 x 65 x 14.6mm. Approx 106g LTE download speeds up to 150Mb/s LTE upload speeds up to 50Mb/s Data Rates* HSPA+ Downlink up to 42Mb/s HSDPA Mode up to 21.6Mb/s...

Table of Contents