Checking And Displaying The Shooting Status - Panasonic AJ-PX800G Operating Instructions Manual

f [SDI&]: Status where recording stop is being instructed for an external device
Displays the 4G/LTE connection status. Displays at the 4G/LTE connection. Displays the strength of the signal reception in six levels. Displays the
radio wave strength with the number of vertical bars. It is not displayed when the setting of 4G/LTE is disabled.
f [4G/LTE ]: During 4G/LTE connection
f [4G/LTE ]: When not connected with4G/LTE
f [4G/LTE ]: When there is a problem with the 4G/LTE connection
@ NOTE
t Depending on the USB modem that is supported, vertical bars that indicate the signal strength may not be displayed.
Camera status display
These are indicated in the information display area in the center.
[ABB]: Displayed while automatic black balance operation is active.
[ATW MODE]: Displayed when the <AUTO W/B BAL> switch is pushed to the <AWB> side while auto tracking white balance is active. This is also
displayed when the <WHITE BAL> switch is turned to <B> if [ATW] is allocated.
[AWB]: Displayed while automatic white balance operation is active.
[WHITE:PRE ****K]: Displays the set color temperature when the <WHITE BAL> switch is switched.
[AWB PRESET ****K]: Displayed when the <WHITE BAL> was set to <PRST> in an attempt to execute automatic white balancing.
[BACK LIGHT]: Displayed when pressing the USER button to which [BACKLIGHT] is allocated for iris control, and switching the status.
[GAIN**dB]: Displayed when gain is switched.
[SHUTTER 1/****]/[SHUTTER OFF]: Displayed when you switch the shutter speed.
[SPOT LIGHT]: Displayed when pressing the USER button to which [SPOTLIGHT] is allocated for iris control, and switching the status.

Checking and displaying the shooting status

Also, the mode check [STATUS] screen is displayed when the <DISP/MODE CHK> switch is pushed towards the <CHK> side. During mode check,
almost all items are displayed including usually hidden items so that the shooting status can be checked. For details on the mode check, refer to "Mode
check display" (page 157).
The list shows the display/hide status of each item in the [STATUS] screen. The display/hide status differ depending on the <DISP/MODE CHK> switch
settings and settings in the main menu → [DISPLAY SETUP] → [OTHER DISPLAY].
f "l" indicates displaying, and "—" indicates hiding.
f [ON]/[OFF] for each item can be selected in the main menu → [DISPLAY SETUP] → [DISPLAY SETTING].
No Item
1 Time code display
2 Frame rate display
3 Proxy information display
4 SD memory card status display
5 System mode display
6 Recording format display
7 Letterbox recording display
8 Streaming mode status display
9 Network mode status display
Remote control display in an IP
10
connection
11 USER button information display
12 Focus bar display
13 Date and time display
14 Audio level meter display
15 Digital zoom display
16 Y GET brightness display
17 ND filter display
18 Shutter speed display
19 <WHITE BAL> switch position display
20 Gain display
21 Iris display
22 Zoom position display
23 Focus control information display
24 Recommended ND filter display
Camera warning, notification display
25
area
Automatic white balance abnormal
26
display
Automatic black balance abnormal
27
display
Chapter 8 Display — Screen status display
Shooting Playback MODE CHK>:
l l
l l
—
l
—
l
l l
l l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
l l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
l l
—
l
—
l
– 156 –
<DISP/
<DISP/MODE
CHK>: <OFF>
<CHK>
—* —*
1 1
—
l
—*
l
2
—*
l 2
—
l
—
l
—
l
—
l
—
l
—
l
—* —*
1 1
—* —*
1 1
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
—
l
l l
—
l
—
l
<DISP/MODE CHK>: <ON>
[OTHER DISPLAY]
[ALL] [PARTIAL] [USER]
—* —*
1 1
l l
—* —*
1 1
l l
—
l
—
l
—
l
— —
— —
—* —*
1 1
—* —*
1 1
—* —*
1 1
—* —*
1 1
—* —*
1 1
l l
l l
—
l
l l
l l
l l
l l
—* —*
1 1
—* —*
1 1
—* —*
1 1
—* —*
1 1
— —
— —
—*
1
l
l
l
l
l
l
—
—
—*
1
—*
1
—*
1
—*
1
—*
1
l
l
l
l
l
l
l
—*
1
—*
1
—*
1
—*
1
—
—