Service Check - Yamaha M7CL-32 Service Manual

M7CL-32/M7CL-48
Item Check name
1-21 All/Color by Color
1-22 Individual lighting
1-23 Controller input/drive
1-24 METER BRIDGE
1-25 ETHERNET
*1 Visually check each PANEL if neccesary as checking runs automatically.

1. Service Check

If jigs necessary for some checking item are not available, clear
the check box for the checking item before executing check.
Preparation
1) Object to be checked: M7CL
2) PC
DOS/V PC: 1 set
(with P-200 MHz or more, Windows 2000/XP, Ethernet port)
YAMAHA Ethernet-MIDI driver should be installed in advance.
For detailed information for installation, please refer to
Readme.txt supplied with the driver and instruction manual
of the existing product.)
3) Tools required for check
MY SLOT CHECK Ver.2 check jigs (AAX59920):
3 (for checking slot only)
D-SUB 9pin (HA REMOTE) Loop back jig:
1 (for checking REMOTE only)
4) Cable
CANNON (2 TR) male↔female: 2 (Check 2 TR in
operation)
BNC (Word Clock):
LAN (UTP CAT.5 CROSS):
MIDI:
5) Others
USB memory:
Tester (to measure the voltage of the LAMP)
6) PC settings
Ethernet setting
(Control panel→Network connection→Local area
connection→Properties→TCP/IP property: In case of
Windows Xp)
Check IP Address and Subnet Mask in the Network window
of the M7CL. Set an IP Address which is different from that
for M7CL in the same Subnet, and the one for Subnet Mask
and Default Gate Way that is the same as that for M7CL.
128
Check that all LEDs light up
Check that LEDs light up by block/line/element
Check input/drive of SW/ENCODER/FADER
Check that METER BRIDGE lights up
Check by communication with PC
1
1
1
1
Outline of check item
DME-N Network Driver setting
(Control Panel→DME-N Network Driver)
Device No.
Device Name
Device ID
TCP-KEEPALIVE
Check IP Address and MAC Address in the Network window
of the M7CL and input them to the IP Address and Protect No.
If it is impossible to find settings on M7CL side, use M7CL-
EtherGet.exe to check through MIDI terminal. Refer to the
Readme.txt for operations. If the setting cannot be checked
with the above way, check MAC ADDRESS sticker (which
is not attached to old models) and ask the user IP Address,
or get user's permission to have the administrator authority.
If the setting cannot still be checked with the above way, get
user's permission to save the data, execute MEMORY
INITIALIZE and check in SETUP screen.
7) How to start on M7CL side
Activate the test program from PC application and the unit
will be in the test mode.
8) How to start PC
Activate M7CLTest_service.exe through Windows.
Select which model to check with M7CL-32 or M7CL-48
button in the start-up screen and click the [M7CL SERVICE]
button.
9) Saving M7CL data
It is recommended to save data if the circuit boards are to be
replaced, MEMORY INITIALIZE is to be executed, or
version is to be updated. If the screen can be operated
normally, recall SAVE/LOAD screen, execute ALL SAVE
and write down USER SETUP settings. (USER DEFINED
KEYS, PREFERENCES, and USER LEVEL are not
included in the ALL. If the user does not have KEY file or
they cannot be checked, write down or copy the screen as
needed.)
Judgment
Visual check *1
Visual check *1
Visual check *1
Visual check
Auto
1
(optional)
1
on