Yamaha M7CL-32 Service Manual page 198

M7cl series digital mixing console
Hide thumbs Also See for M7CL-32:
Table of Contents

Advertisement

M7CL-32/M7CL-48
Message
REMOTE: Data Overrun!
REMOTE: Rx Buffer Full!
REMOTE: Tx Buffer Full!
Saving Aborted.
SLOT x: Data Framing Error!
SLOT x: Data Overrun!
SLOT x: Rx Buffer Full!
SLOT x: Tx Buffer Full!
Storage Full!
Storage Not Found!
Storage Not Ready!
Sync Error! [xxx]
Tap Operation Ignored.
This Operation is Not Allowed.
Total Slot Power Capability Exceeded!
Unsupported File Format!
USB: Data Framing Error!
USB: Data Overrun!
USB: Rx Buffer Full!
USB: Tx Buffer Full!
Wrong Password!
Wrong Word Clock!
You Cannot Create User Key.
198
Invalid signals are being input to the REMOTE connector.
Too much data is being received at the REMOTE connector.
Too much data is being sent from the REMOTE connector.
Saving to the USB storage device has been interrupted.
Invalid signals are being input from the SLOT x input port.
Invalid signals are being input from the SLOT x input port.
Too much data is being received at the SLOT x input port.
Too much data is being sent from the SLOT x output port.
The file could not be saved because there is not enough space on the USB storage device.
The USB storage device could not be recognized.
Access is not possible because the USB storage device is not ready.
The M7CL is not synchronized with the [xxx] signal.
Tap operation was ignored because the TAP TEMPO button is not displayed in the screen.
This operation has been ignored because the current user does not have permission.
The I/O cards installed in the slots exceed the rated power capacity.
The file you attempted to load from the USB storage device is of an unsupported format.
Invalid signals are being input from the USB connector input port.
Invalid signals are being input from the USB connector input port.
Too much data is being received at the USB connector input port.
Too much data is being transmitted from the USB connector input port.
The password you input was incorrect.
The M7CL cannot synchronize because the sour c e selected by MASTER CLOCK SELECT in the
WORD CLOCK screen is not appropriate.
The current user does not have permission to create a user key.
Meaning

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M7cl-48

Table of Contents