Logging-In - Yamaha M7CL-32 Service Manual

w COMMENT
Here you can specify or view a comment of up to thirty-
two characters about the user. Press this to access a
keyboard window where you can enter the comment.
e PASSWORD
Specify a password of up to eight characters. Press
this to access a keyboard window where you can enter
the password.
r POWER USER
Specifies whether Power User privileges will be
granted to this user.
t ACCESS PERMISSION
These settings specify the range of operations that
the user can perform. For details on each item, refer
to p. 162.
4
When you have specified the user name,
comment, password, power user privileges
on/off, and user rights, press the CREATE
button.
If you are logged-in as the Administrator, the user
authentication key will be saved on the USB storage
device.
If you are logged-in as a Power User, a dialog box will
ask you to confirm the store-destination USB storage
device. If you want to save the user authentication
key on a different USB storage device, connect the
desired USB storage device and then press [OK].
The user authentication key will be saved, and the
logged-in user will automatically switch to the newly
created user.

Logging-in

In order to operate the M7CL, you must log in as the
Administrator, Guest, or a User.
User settings for the Administrator and Guest are saved in
the console itself, but in order to log in as a User you must
connect a USB storage device on which a user authentica-
tion key has been saved. If you disconnect the USB storage
device after logging-in, your access privileges will forcibly
revert to Guest.
NOTE:
• If the M7CL'S power is turned off and then on again, it will
generally start up in the log-in state in which the power was
turned off. If a user password has been assigned, you will need
to enter the password. However if you cancel the input, you will
be forcibly logged-in as Guest. Similarly, you will also be forcibly
logged-in as Guest if you had been logged-in as a user requiring
a user authentication key, but the USB storage device is no
longer connected.
•
Logging-in as Administrator
1
In the function access area, press the SETUP
button to access the SETUP screen
Log-in button
2
Press the log-in button to open the LOGIN
window.
3
Press the LOGIN button for ADMINISTRA-
TOR.
If no Administrator password has been set, you will
simply be logged-in. If a password has been set, a
keyboard window will appear, allowing you to enter
the password.
4
Enter the password and press the OK button.
If the password was incorrect, a message of
"WRONG PASSWORD" will appear in the bottom of
the screen.
M7CL-32/M7CL-48
159