User-Defined Keys - Yamaha M7CL-32 Service Manual

M7CL-32/M7CL-48
Here's how you can assign the desired functions to the user defined keys in the USER DEFINED section of the top panel, and
press these keys to execute the defined function.
This assignment procedure will define the user-defined keys for the user who is currently logged-in, but if you are logged-in
as the Administrator, you can also make user-defined key settings for the Guest account.
1
In the function access area, press the SETUP
button to access the SETUP screen.
USER SETUP button
2
Press the USER SETUP button to access the
USER SETUP popup window.
USER DEFINED KEYS
tab
3
Press the USER DEFINED KEYS tab to select
the USER DEFINED KEYS page.
If you are logged-in as the Administrator, you can
also select the USER DEFINED KEYS for GUEST
page to make user-defined key settings for the Guest
account.
166

User-defined keys

USER DEFINED KEYS
for GUEST tab
The twelve buttons in the screen corresponds to
user-defined keys [1]–[12] on the panel, and the func-
tion or parameter assigned to each one is shown be-
low the corresponding button. If nothing is assigned
to the button, an indication of "—" is shown.
4
Press the button for the user-defined key to
which you want to assign a function.
The USER DEFINED KEY SETUP window will ap-
pear. In this window you can select a function to as-
sign to the user defined key, and select option param-
eters.
5
Make sure that the FUNCTION field is en-
closed by a yellow frame, and then use the
[↑]/[↓] buttons in the lower part of the field or
the multifunction encoders of the panel to
select the function you want to assign.
If the selected function has additional parameters,
the parameters are shown in the PARAMETER 1/2
field.
6
If the selected function has parameters,
press the PARAMETER 1 or 2 field to move
the yellow frame, and select parameters 1
and 2 in the same way.
7
Press the OK button to close the USER DE-
FINED KEY SETUP window.
8
Assign the desired functions to other user-
defined keys in the same way.
9
To execute an assigned function, press the
corresponding USER DEFINED [1]–[12] key
on the panel.