CALIBRATION FUNCTION
• Adjusting the detection point of the touch screen
Here's how to correctly align the positions of the LCD display and the touch screen.
1
While holding down the SCENE MEMORY
[STORE] key of the panel, turn on the power.
After the opening screen, the following startup menu
screen will appear.
2
Press the TOUCH SCREEN CALIBRATION
button.
The TOUCH SCREEN CALIBRATION MODE screen
will appear, allowing you to adjust the touch screen.
Note
When you cannot start calibration by touching, press the SCENE
MEMORY [
] [
] key to select TOUCH SCREEN CALIBRA-
TION button and then press the [STORE] key to start.
3
Press the START button.
A confirmation dialog box will appear.
4
Press the OK button in the dialog box.
A cross-shaped cursor will appear in the screen.
5
This cursor will appear a total of three times.
Press each location at which it appears.
Note
In order to set the detection points accurately, press the cross-
shaped cursor from the position and posture in which you normally
operate the unit.
6
Press the EXIT button.
The M7CL will start up in normal operating mode.
Hint
Alternatively, you can continue by selecting a different menu in-
stead of pressing the EXIT button.
M7CL-32/M7CL-48
191