Table of Contents
Advertisement
With ARRIRAW Recordings, fixed bug in which the .ari files from the Gemini Recorder would appear in
DaVinci Resolve with a frame rate of 16801.
Improved detection of missing 2
With ARRIRAW high frame rate recordings (48P and above), the calculated timecode which is used for
the file-name extension is now based on the Project Rate, not the Sensor Rate.
With 3D DPX Recordings, a 29.97/30PSF signal is now accepted, whereas previously only a 29.97/30P
signal (along with 23.98/24/25P or PSF) was accepted.
Please Note: With Firmware 1.3.105 or higher (which includes this firmware release), one must use an
AC Powered Transfer Station, and not a USB-powered Transfer Station. USB-based power sources
typically provide insufficient power and can damage the SSD's.
For those wanting to use Thunderbolt, Firewire 800 or USB 3.0, a Universal Transfer Station is available free of
charge from Convergent Design.
The USB 3.0 adapter is included, but the Thunderbolt or Firewire 800 adapters, if
needed must be purchased separately.
Many professional users need an eSATA interface. This includes Mac Pro users that are not using USB 3.0.
If you
are currently using our original USB Powered eSATA Transfer Station, please discontinue its use to prevent damage
to your SSD's.
Please request a free AC Powered eSATA Transfer Station from Convergent Design, if you need to use eSATA (and
USB 3.0 or Thunderbolt is not available to you).
Also note that with very large Clips, the Mac may take up to several minutes to display the files folder of a given Clip,
as it goes through an internal process of indexing the files, particularly for OSX Lion.
Known Issues, Version 1.4.101
3D DPX: occasional incorrect timecode values.
2K DPX RAIDed Recordings: will not play back correctly from the Gemini. If 1 SSD is removed,
however, the other SSD will play back correctly.
Using camera trigger w: start +
Using Camera Trigger with Sony F3 with the Gemini: starts recording 8 frames after SYS.
www.Gemini444.com
Gemini 4:4:4 User Manual
nd
cable when in Dual-link with ARRIRAW input.
021313
72 |
P a g e
Advertisement
Table of Contents
