Table of Contents
Advertisement
20. If you wish to then reuse this SSD (normally the case, unless you have additional Gemini
4:4:4's to update):
a. Insert the SSD back into the Gemini 4:4:4
b. Click on Cancel (to avoid performing the Firmware Update again)
c. Reformat the SSD (Click on Menu, then Gemini, then SSD's, then Format SSD1 or Format
SSD2)
This step is very important:
Then power off the Gemini 4:4:4, then Power it back on.
If you fail to perform this step to power cycle the unit, then all features of
the Gemini 4:4:4 may not work properly.
TROUBLE SHOOTING: ! UPDATE FAILED ! or ! EMERGENCY UPDATE !
Check your power source, pull the power, and then run the update again. MAKE SURE THERE IS NO
VIDEO SOURCE plugged into the unit, and that there is only ONE SSD PRESENT. If this process fails
twice, contact Support.
www.Gemini444.com
Gemini 4:4:4 User Manual
021313
56 |
P a g e
Advertisement
Table of Contents
