Gemini 4:4:4 User Manual page 72

*** In most, but not all cases, currently unsupported formats from the C500 will cause a "Not Supported" message
on the Gemini Recorder. Do not attempt to record any formats from the Canon C500 not currently supported by the
Gemini Recorder (as specified in the above listings), the results will be unpredictable in such cases. Also, ensure the
C500's output matches the Input Status of the Gemini Recorder.
2. Please note the following when using the Canon C500 with the Gemini Recorder:

If you wish to record DPX from the Canon C500 (meaning the C500's "System Priority" is set to 2K or
MXF) : ensure that the Gemini is set to Setup-> Mode-> DPX.

If you wish to record Canon Raw or Half Raw from the C500 (meaning the C500's "System Priority" is
set to 4K) : ensure that the Gemini is set to Setup-> Mode-> Canon Raw.

When in Camera Trigger for any Canon Raw or Canon DPX recordings, the Gemini Recorder will
attempt to retrieve the base Clipname from the C500. The C500 must be simultaneously recording
internally, in order for the Clip-name to be passed to the Gemini Recorder.

In instances where two recorders are required: Simultaneous in-camera recording is needed to ensure
proper clip-naming across two recorders. Additionally the two recorders' dates must match, for proper
clip-naming.

For Canon Raw, the Playback/Project rate is set by the Camera.

For Canon DPX, the Playback/Project can be set in the
Gemini Recorder menu Setup->Project->Frame Rate.
3. Display of Activated Features in About menu :
The Activated (paid upgrade) features for a given Gemini Recorder are now shown in the About menu
(Gemini->About ).
4. Updated Software Tools:
Software Tools have been updated:
GeminiTransfer 1.2: in addition to 1080p60 and 3D 1080p30 un-packing, now supports all 12-bit DPX
file un-packing to 16-bit (for editor / color corrector compatibility) .
GeminiClipMerger 2.2: in addition to 2-folder merge from RAIDed Records, now supports 4-folder
merge from Recordings which require 2 Recorders / 4 SSD's.
Bug Fixes / Other Workarounds

ARRIRAW 4:3 23.98/24P Recordings are now recorded to one SSD, previously such recordings were
split across two SSD's.

Fixed bug with ARRIRAW Recordings, in which the timecode associated
with the file, did not match the calculated timecode as part of the file name extension – the value was
off by 1 or 2 sometimes. This has been corrected.

With ARRIRAW Recordings, (using Camera Trigger on the Gemini Recorder), added ability to set the
next Reel number when the Camera is passing "000" as the Reel number to the Gemini Recorder.

When this happens now, the Gemini will revert to its own internal "Next Reel", which behaves in a
similar fashion as the Camera's "Next Reel" setting and can be edited in the Gemini menu Record-
>Clip->Next Reel, when applied.

The Reel number for a given take is reflected in the 2
can be noted in the "Next Take" field of the Gemini.
www.Gemini444.com
Gemini 4:4:4 User Manual
nd rd th
, 3 , and 4 characters of the clip-name, and
021313
71 | P a g e