Table of Contents
Advertisement
SSD Status Indicators
The LED lights associated with each SSD drive will display the following
status color indicators:
Drive needs to be formatted within the Gemini.
Drive is completely full and can be played back or formatted for a new record.
Drive is ready to record.
SSD card is initializing.
Drive is currently playing back.
Drive is currently recording. NEVER REMOVE SSD DURING RECORD OR PLAYBACK!
Powering Up; System Test
Drive has old clips which can be played back but to record new SSD's must be formatted.
System Status Indicators
The LED lights located in between each SSD drive, in the middle of the unit, will display the
following status color indicators:
Ready for record.
Recording. IF FLASHING RED, SEE TROUBLESHOOTING BELOW.
Play Mode. CURRENTLY PLAYING.
SSD Firmware Updates
If an SSD update is available, a dialog will appear to update your SSD(s) (upon insertion of the SSD). Please perform
SSD updates at your earliest convenience. Ensure that SSD data is backed up and that the Gemini has a reliable
power source, before updating SSD's. This process takes about 30 seconds.
www.Gemini444.com
Gemini 4:4:4 User Manual
021313
SSD Status Indicators
24 |
P a g e
Advertisement
Table of Contents
