Table of Contents
Advertisement
2.
Use the "Safely Remove Hardware" option or shutdown/restart your computer gracefully, to
ensure that the firmware has been completely transferred to the SSD.
3.
Otherwise, the firmware update may not be successfully copied to the SSD, and then the
Gemini 4:4:4 will not find the firmware update.
11. Ensure that you have adequate power to power the Gemini 4:4:4, either battery or AC Power.
The firmware update takes approximately 5 minutes, but please ensure that you have at least
30 minutes of battery time remaining to ensure safety.
12. Power up the Gemini 4:4:4.
13. Removing any video input cables.
14. Remove all SSD's.
15. Insert the SSD with the firmware update.
16. Then power on the unit.
17. You will see a Firmware Update screen if the file is on the SSD properly.
18. Follow the On-Screen Prompts to complete the firmware update.
19. When complete it will say: "DONE – PLEASE REMOVE UPDATE DRIVE"
(Please remove the SSD; The unit will then power off and back on automatically).
www.Gemini444.com
Gemini 4:4:4 User Manual
021313
55 |
P a g e
Advertisement
Table of Contents
