Gemini 4:4:4 User Manual page 68

For System Priority = "2K" on the C500:
 RGB 4:4:4 1080P (1920x1080) 10-bit @ 23.98, 24, 25, 29.97, 50, 59.94 fps
(29.97 and above requires two SSD's) (recorded as ".DPX" files)
(1080p59.94 DPX recordings require Gemini Transfer utility to convert 10-bit "packed" to "un-packed"
for editing)
 RGB 4:4:4 1080P 12-bit @ 23.98, 24, 25, 29.97 fps
(25 and above requires two SSD's) (recorded as ".DPX" files)
(all 12-bit recordings require Gemini Transfer utility to convert 12-bit DPX
to 16-bit DPX format for editing)
 RGB 4:4:4 2K (2048x1080) 10-bit @ 23.98, 24, 25, 29.97 fps
(29.97 fps requires two SSD's) (recorded as ".DPX" files)
 YCC 4:2:2 1080P @ 23.98, 24, 25, 29.97, 50, 59.94, 100, 119.9 fps
(Recorded as 4:4:4 RGB for compatibility with industry standard software)
(29.97 and above requires two SSD's) (recorded as ".DPX" files)
(59.94p, 119.9 fps requires Gemini Transfer utility to convert 10-bit "packed" to
"un-packed" for editing )
(YCC 4:2:2 1080P @ 100, 119.9 fps DPX requires two recorders / four SSD's, and is accessed by enabling
Slow/Fast on C500)
Not supported at this time from the Canon C500:
• Canon Half-Raw Quad HD (3840x1080) @ 50, 59.94, 100, 119.9 fps
• C500 Slow/Fast: (Canon Raw) partially supported: only supported when the Slow/Fast Rate is set to the
Maximum Rate and complies with the supported listings above, which includes 4K Half-Raw 50 fps
cranked to 100, and 4K Half-Raw 59.94 fps cranked to 120 (119.9)
• C500 Slow/Fast (Canon DPX) (C500 System Priority = 2K or MXF): only supported when the Slow/Fast
Rate is set to the Maximum Rate and complies with the supported listings above, which includes YCC
4:2:2 50 fps cranked to 100, and YCC 4:2:2 59.94 fps cranked to 120 (119.9)
• RGB 4:4:4 2K (2048x1080) 12-bit
• RGB 4:4:4 2K (2048x1080) 10-bit (50, 59.94, 100, 119.9 fps)
• RGB 4:4:4 1080p (1920x1080) 12-bit (50, 59.94 fps)
• YCbCr 4:2:2 1080i, 720p formats
• C500 Frame Record, Interval Record
Please note the following with regard to using the Canon C500 with the Gemini Recorder:
 If you wish to record DPX from the Canon C500 (meaning the C500's "System Priority" is set to 2K or
MXF): Ensure that the Gemini is set to Setup-> Mode-> DPX.
 If you wish to record Canon Raw or Half Raw from the C500 (meaning the C500's "System Priority" is set
to 4K): Ensure that the Gemini is set to Setup-> Mode-> Canon Raw.
 When in Camera Trigger for any Canon Raw or Canon DPX recordings,
the Gemini Recorder will attempt to retrieve the base "Clipname" from the C500.
The C500 must be recording internally simultaneously,
in order for the Clip-name to be passed to the Gemini 4:4:4.
www.Gemini444.com
Gemini 4:4:4 User Manual 021313
67 | P a g e