Operating Mode Description; Set Timer - Truma DIGITAL TIMER CONTROL User Instruction Manual

TR U M A D I G ITAL TI MER CON TR OL
Symbol Operating mode
–
a
b
c
d

Set timer

• Use the control knob / push button to select
the symbol in menu line (4).
• Click to change to the setting level.
Note: If the timer is activated (ON), the timer
in the menu is shown as deactivated (OFF).
Enter start time
• Use the control knob / push button to set the
hours, then the minutes.
Enter end time point
• Use the control knob / push button to set the
hours, then the minutes.
Note: If the start / end times are exceeded
when entered, the operating parameters are
only taken into consideration when the next
start / end times are reached. Until then, the
operating parameters set outside the timer
remain valid.
84
Description
Off Fan is switched off
Circulating air, if no device is in operation. 9 speed levels can
Vent
be selected.
Eco Low fan level
Mid High fan level (only Combi Gas)
Fast heating of the room. Available, if the difference between
High
the selected and current room temperature is >10 °C.
Set the room temperature
• Click to change to the setting level.
• Use the control knob / push button to select
the required room temperature.
• Click the control knob / push button to
confirm the value.
Set the warm water level
• Click to change to the setting level.
• Use the control knob / push button to select
the required warm water level.
• Click the control knob / push button to
confirm the value.