Advertisement
GENERAL (cont.)
13.Check for damaged parts. Before use carefully check the tool and
power lead for damage. Check for misalignment and seizure of moving
parts, breakage of parts, damage to guards and switches and any other
conditions that may affect its operation. Ensure that the tool will operate
properly and perform its intended function. Do not use the tool if any
parts are damaged or defective. Do not use the tool if the switch does
not turn it on and off. Have any damaged or defective parts repaired or
replaced by an Ozito Authorised Service Agent. Never attempt any
repairs yourself.
14.Unplug the tool. Shut off the power and wait for the tool to come to a
complete standstill before leaving it unattended. Unplug the tool when it
is not in use, before changing any parts of the tool, accessories or
attachments and before servicing.
15.Avoid unintentional starting. Do not carry the tool with a finger on the
on/off switch. Make sure the tool is switched off when plugging in.
16. Do not abuse the cord. Never carry the tool by its cord or pull it to
disconnect from the socket. Keep the cord away from heat, oil and
sharp edges.
17.Connect dust extraction equipment. If devices are provided for the
connection of dust extraction and collection facilities, ensure that these
are connected and properly used.
18.Store idle tools. When not in use, tools should be stored in a dry, locked
up or high place, out of reach of children.
19. Maintain tools with care. Keep tools clean and in good condition for
better and safer performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry, clean and free from
oil and grease.
20.Have your tool repaired by an authorised OZITO SERVICE AGENT.
This power tool complies with relevant safety requirements. To avoid
danger, electrical appliances must only be repaired by qualified technicians
using original spare parts; otherwise this may result in considerable danger
to the user.
21.Users. This appliance is not intended for use by young children or
infirmed persons without supervision. Young children should be
supervised to ensure that they do not play with this appliance.
22.Replacement of the supply cord. If the supply cord is damaged, it
must be replaced by the manufacturer or an authorised Ozito Service
Agent in order to avoid a hazard.
5
Advertisement
