Polycom RealPresence Group Series Release Notes page 28

Release Notes
Polycom RealPresence Group Series, Version 4.1.1.1
Category Issue ID
Security GS-11599
Security GS-11210
Security GS-10924
Setup Wizard GS-9520
Setup Wizard GS-8140
SIP GS-11139
28
Found in
Release Description
4.1.1 When you specify the OSCP
responder address, do not use
a nonstandard port. If the OSCP
responder server is not using
the standard port (9180), the
RealPresence Group system
cannot connect to the server
and cannot validate certificates.
4.1.1 The System Status page might
not load correctly under certain
conditions when certificate
validation is required. When
using certificates for network
services, ensure that the system
configuration is correct (OCSP
responder, CA Root certificates,
etc.).
4.1.1 Remote user access is not
currently supported on
RealPresence Group Series
systems. The Remote Access
password rules under Admin
Settings > Security > Local
Accounts > Password
Requirements apply only to
administrator remote access
passwords.
4.0.2 On occasion, when going
through the setup wizard, the
audible Hello in the language
selected on the Language
screen is not heard.
4.0.2 When enabling 802.1x
authentication using the setup
wizard, the only indication that
invalid credentials were entered
is that the RealPresence Group
system has no IP address.
4.1.1 If you set the SIP transport
protocol to Auto, the UDP
protocol might be used. If the
expected transport protocol is
TLS, specify the SIP transport
protocol as TLS.
Workaround
Configure the OSCP
server to use the standard
port number 9180.
Verify your system
configuration and
determine whether you
need to add other
certificates.
Verify that the credentials
you enter are correct.
Do not select Auto for the
SIP transport protocol if
you expect to use TLS.
Instead, select the TLS
transport protocol.
Polycom, Inc.