Polycom RealPresence Group Series Release Notes page 25

Release Notes
Polycom RealPresence Group Series, Version 4.1.1.1
Category Issue ID
Interoperability GS-601
TANDBERG
Monitors GS-8188
Multipoint GS-9938
Multipoint GS-7724
Multipoint GS-7402
Multipoint GS-452
People+Content GS-563
Profiles GS-12625
Polycom, Inc.
Found in
Release Description
4.0.0 Content does not work when a
RealPresence Group system is
in a SIP call with a Tandberg
MXP system.
4.0.1 On the RealPresence Group
700 system, the output display
is always black when Monitor 1
is a VGA monitor with a Sleep
setting of No Signal. If Monitor 2
and Monitor 3 are VGA monitors
and the Sleep setting is No
Signal, the system does not
send a signal to those monitors
when it goes to sleep.
4.0.2 On occasion, when a
RealPresence Group 700
system is the MCU in an 8-way
call, the system has a slight
delay in responding when the
user navigates to the local
interface.
4.0.2 When a RealPresence Group
system is the MCU in a 4-way
call and another endpoint sends
content, the MCU does not
display Content Call statistics
for the endpoint sending
content.
4.0.0 In a multipoint call that uses a
RealPresence Group system as
the MCU and has a meeting
password greater than 32
characters, endpoints cannot
join the call.
4.0.0 RealPresence Group systems
do not support Conference on
Demand.
4.0.0 The RealPresence Group
Series systems do not support
Enterprise People+Content.
4.1.1 All configuration settings might
not be included in a profile
export.
Workaround
Instead of using the SIP
protocol, use H.323.
Make sure the meeting
password is no longer
than 32 characters.
Use H.239
standards-based
People+Content.
After importing a profile,
manually update the
settings that were not
included in the export.
25