Brother DCP-9020CDW Basic User's Manual page 138

Level 1 Level 2
WLAN
Network
(continued)
(continued)
Wi-Fi Direct Push Button —
Network User's Guide
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/.
Visit the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/.
The factory settings are shown in Bold with an asterisk.
130
Level 3 Level 4
WPS w/ PIN Code —
WLAN Status Status
Signal
SSID
Comm. Mode —
MAC Address —
Set to Default —
WLAN Enable —
Level 5 Options
— —
—
Active(11b)
Active(11g)
Active(11n)
Wired LAN Active
WLAN Off
AOSS Active
Connection Failed
—
Strong
Medium
Weak
None
— —
Ad-hoc
Infrastructure
None
— —
—
Yes
No
—
On
Off*
— —
Descriptions
You can easily
configure your
wireless network
settings using WPS
with a PIN code.
You can see the
current wireless
network status.
You can see the
current wireless
network signal
strength.
You can see the
current SSID.
You can see the
current
Communication
Mode.
Shows the MAC
address of the
machine.
Restore the
wireless network
settings to factory
setting.
Enable or disable
the wireless LAN
manually.
You can easily
configure your
Wi-Fi Direct™
network settings
using the
one-button push
method.