Table of Contents
Advertisement
TRENDnet User's Guide
Hardware Installation
Cabling
It's recommended that the wiring the cable in your home or office by a
professional. If you already have the cable deployed, make sure the cable
and the connectors meet the category 5 Ethernet cable standards. At
least 2 pairs of twisted lines are required for power and data. Poor cable
quality may cause unexpected problems. Testing your cable or running a
new cable is suggested for new camera installation.
Waterproof cap
The TV-IP321PI itself is IP66 grade water and dust proof. There is a set
of network cable water proof caps that comes with the package as well.
Run your cable going through the accessories, and then crimp the cable
with an RJ45 module. Plug in the network cable and then tighten the
waterproof cap to prevent water running into camera through the cable.
© Copyright 2015 TRENDnet. All Rights Reserved.
Mount your camera
Try out the best camera video shooting position.
and the cable hole if necessary with the drill template comes with the
package.
Loosen the screws with the torx screw driver which comes with the
package to remove the lower dome.
TV-IP321PI
Drill the screw holes
14
Hide quick links:
Advertisement
Table of Contents
