Physical Descriptions; Angle Adjustment; Reset Button - TRENDnet TV-IP321PI User Manual

TRENDnet User's Guide

Physical Descriptions

1. Mounting base
2. Horizontal stand
3. Vertical stand
4. Lower dome
5. Cables
6. Infra-red lamps
7. Lens
8. Black Liner
9. Safety rope
© Copyright 2015 TRENDnet. All Rights Reserved.
DC Power
10/100 PoE
Network Port 12V DC 1A
(Optional)

Angle Adjustment

Loosen the tilt lock screws, adjust the tilting position in a range from 15
to 90, and tighten the tilt lock screws.

Reset Button

Push and hold the reset button then power on the camera. Keep holding
the reset button for more than 10 seconds to reset configuration to
factory default.
TV-IP321PI
Screw
Reset Button
7