Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TRENDnet TV-IP325PI
Summary of Contents for TRENDnet TV-IP325PI
-
Page 2: Table Of Contents
TRENDnet User’s Guide TV‐IP325PI Daylight Savings .................... 20 Contents Live View Settings .................... 20 ...................... 1 Maintenance ...................... 21 Product Overview ................ 3 Network Settings ................ 22 Features ........................3 TCP/IP ........................ 22 Specifications ......................3 Port ........................ 23 Package Contents ....................4 DDNS ........................ 24 Front View .......................5 802.1X ........................ 24 Angle Adjustment ....................5 Quality of Service (QoS) .................. 25 Reset Button ......................5 UPnP ........................ 25 Warnings ........................6 Video Settings ... -
Page 3: Product Overview
IP67 Rating Outdoor IP67 weather rated housing Features Motion Detection TRENDnet’s Indoor/Outdoor 1MP H.264 PoE IR Dome Network Camera, model TV‐IP325PI, provides day and night surveillance with a night vision Create custom motion detection zones to record video and send email range of up to 30 meters (98 ft.) This IR dome network camera delivers year‐ notifications when a zone is triggered. round surveillance with an IP67 weather rated housing designed for outdoor ... -
Page 4: Package Contents
TRENDnet User’s Guide TV‐IP325PI Digital Wide Dynamic Range (D‐WDR) Package Contents Adjustable D‐WDR setting improves image quality and clarity when a camera TV‐IP325PI package includes: is exposed to high contrast lighting environments by enhancing the dark areas of the image to make them more visible. TV‐IP325PI Weather seal 3D‐DNR Torx Security Allen Key Quick installation guide Digital Noise Reduction (DNR) is a method by which the camera's imager Camera mounting hardware digitally removes noise from the image. 3D DNR is an advancement of this ... -
Page 5: Front View
TRENDnet User’s Guide TV‐IP325PI Angle Adjustment Loosen the tilt lock screws, adjust the tilting position in a range, and tighten the tilt lock screws. Front View Reset Button 1. Mounting base 2. Horizontal stand 3. Vertical stand 4. Lower dome 5. 10/100Mbps PoE network port 6. Power port (optional) 7. Infra‐red lamps 8. Lens 9. Black Liner Safety rope © Copyright 2018 TRENDnet. All Rights Reserved. 5 ... -
Page 6: Warnings
TRENDnet User’s Guide TV‐IP325PI Warnings Cautions Injury or equipment damage may be caused if any of these cautions are Serious injury or death may be caused if any of these warnings are neglected. neglected. Follow these precautions to prevent potential injury or material Follow these safety guards to prevent serious injury or death. damage. • If using the power adapter, please choose the power adapter that meets the safety extra low voltage (SELV) standard or IEC60950‐1 and • Make sure the power supply voltage is correct before using the Camera. Limited Power Source standard. • Do not drop the camera or subject to physical shock. ... -
Page 7: Plan For Installation Location
TRENDnet User’s Guide TV‐IP325PI • Sunlight: Avoid direct sun light exposure. Direct sun light will damage Plan for installation location the image sensor. If sunlight is necessary for your viewing purposes, provide protection for the image sensor. Viewing angle • Lighting: Consider installing your camera faces the same direction of The TV‐IP325PI is a dome camera with a focused viewing angle (81) that the light sources. Shooting images with top‐down position outdoor or provides non‐distorted and detailed images. Choose the location where has next to the existing light source are good choices. Avoid the light source good angle to shoot the image you expect to see. The motion detection area if it creates a shade that darkens the viewing area. should also be considered when installing the camera. ... -
Page 8: Hardware Installation
TRENDnet User’s Guide TV‐IP325PI Hardware Installation Setup Your Camera with Camera Utility 1. Please download the utility at Cabling http://www.trendnet.com/camerautility It’s recommended that the wiring the cable in your home or office by a professional. If you already have the cable deployed, make sure the cable and 2. Extract the downloaded file and double click on the camera utility file the connectors meet the category 5 Ethernet cable standards. At least 2 pairs to install of twisted lines are required for power and data. Poor cable quality may cause unexpected problems. Testing your cable or running a new cable is suggested for new camera installation. Waterproof cap The TV‐IP325PI itself is IP66 grade water and dust proof. There is a set of ... - Page 9 TRENDnet User’s Guide TV‐IP325PI 4. This will also require you to Install WinPcap program if you don’t have 6. After the computer has restarted, double click on the Camera Utility icon this installed before, please follow the on screen Instructions to to launch the program. Install It. 7. Find the camera you would like to access and configure then double click on the IP address. 5. Restart the computer after the Installation. 8. Continue to the next section Access your Camera with the Web Browser for detail configurations of the camera. © Copyright 2018 TRENDnet. All Rights Reserved. 9 ...
-
Page 10: Logging-In To The Camera For The First Time (Windows)
TRENDnet User’s Guide TV‐IP325PI Logging‐in to the Camera for the First Time (Windows) 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. Click the link to download the plug‐in from 1. Find the camera from the Utility and double click on the IP address to the camera. (For Internet Explorer and Safari only) open the browser. 2. Activate the admin User Account by entering your desired password, and then click OK. 4. Download the plug‐in to your computer and then and close your browser. Launch the plug‐in installation to install the plug‐in. ... - Page 11 TRENDnet User’s Guide TV‐IP325PI 5. Permission request may show up depends on the Internet security 7. Click Finish to finish the installation. settings on your computer. Click Yes to install the plug‐ in. 8. Open the browser and login again, enter the user name admin and new password again to start secured session. 6. Click Next to install the plug‐in. © Copyright 2018 TRENDnet. All Rights Reserved. 11 ...
-
Page 12: Logging-In To The Camera For The First Time (Os X)
TRENDnet User’s Guide TV‐IP325PI 9. Refresh the browser and the Live View page will show up and begin Logging‐in to the Camera for the First Time (OS X) streaming video 1. Open the web browser on your computer. In the address bar, enter the default IP address of the camera 192.168.10.30. If the camera is connected to a router/network, please use the Windows Camera Utility to find the exact IP address. ... - Page 13 TRENDnet User’s Guide TV‐IP325PI 3. The camera management page will detect if you installed the camera 5. Go to the Finder and navigate to the Download folder. Command‐Click webcomponent plug‐in or not. Click the link to download the plug‐in from the WebComponents.pkg and then click Open. (If you are install the plug‐ the camera. in from the CD when you don’t have internet connection, just browse to /Mac folder and double click the WebComponents.pkg file.) Note: Internet connection is required to download the plug‐in. If you do not have Internet access, you can find the plug‐in on the CD comes with the package under /Mac folder. 6. Click Open with Installer to start installation. 4. Quit your browser completely by command‐Click on the browser icon ...
- Page 14 TRENDnet User’s Guide TV‐IP325PI 7. Click Continue to install the plug‐in. 9. Use the default location and click Install. 10. Enter your password and click Install Software 8. Select a destination to install the plug‐in. Then click Continue. © Copyright 2018 TRENDnet. All Rights Reserved. 14 ...
- Page 15 TRENDnet User’s Guide TV‐IP325PI 11. Installation will process automatically. 13. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. Enter the user name, admin, and the default password, admin, and then click OK. 14. The Live View page shows up and the video starts to stream. 12. Click Close to exit the installation. © Copyright 2018 TRENDnet. All Rights Reserved. 15 ...
-
Page 16: Live View
TRENDnet User’s Guide TV‐IP325PI Live View After you log‐in into the camera management page, you’ll see the Live View page. Snapshot Click this icon to take a video snapshot. Zoom Click once to enable zoom. When enabled, click and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click the icon again to disable zoom. The zoom function works in full screen mode as ... -
Page 17: System Information
TRENDnet User’s Guide TV‐IP325PI System Information System Information page shows the camera’s basic information. Network Information IP Address: IP address of the TV‐IP325PI Subnet Mask: Network range of IP address Default Gateway: The default route going from the TV‐IP325PI subnet. Primary DNS: Primary DNS server address Secondary DNS: Secondary DNS server address Basic Information Device Name: Human readable device name for easy identification. Firmware Version: Firmware version MAC Address: The MAC address of Ethernet Interface System Time: The system time setup in the camera. Keeping this time correct is important for recording, scheduled control and logging accurately. Device Name: Human readable device name for easy identification. © Copyright 2018 TRENDnet. All Rights Reserved. 17 ... -
Page 18: System Configuration
TRENDnet User’s Guide TV‐IP325PI System Configuration Authentication RTSP: TV‐IP325PI’s video stream can be accessed with RTSP, Real Time Streaming Protocol. Only the Device Settings administrator and users can view this video stream Un‐checking this box will allow everyone access to this video Setup your camera name and location for easy identification. This camera stream without authentication. Default: Checked. name will also be recognized by other network camera software as the name of this camera. OSD, On Screen Display, camera name is referring to this setting as well. Service ... -
Page 19: User Accounts
TRENDnet User’s Guide TV‐IP325PI User Accounts Time Settings You can setup up to 16 user accounts to access the camera’s video stream The accuracy of the system clock is important for scheduling and accurate with a web browser or real time video stream (RTSP). Only one administrator logging. You can synchronize the system time with your computer, or account can be setup to configure the TV‐IP325PI and cannot be deleted. automatically check the time accuracy with a network time server (NTP ... -
Page 20: Daylight Savings
TRENDnet User’s Guide TV‐IP325PI Daylight Savings Live View Settings Setup daylight savings. Setup the live view video quality, file size and file saving directories. Automatic Update Enable DST: Check this box if your time zone has daylight savings. Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings. Click Save to save the changes Live View Parameters Live View Configure the buffer size for live view video stream. With Buffer: low buffer size setting, you can get real‐time video ... -
Page 21: Maintenance
TRENDnet User’s Guide TV‐IP325PI Maintenance Record File Settings Record file size: This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good You can restart, load camera settings and upgrade the camera firmware on for many short recordings. this page. Save record Click Browse and then choose a new destination if you files to: want to save the file somewhere else. Save Click Browse and then choose a new destination if you downloaded want to save the file somewhere else. files to: Picture and Clip Settings Save snapshots Click Browse and then choose a new destination if you in want to save the file somewhere else. live view to: Save snapshots Click Browse and then choose a new destination if you when playback want to save the file somewhere else. to: Save clips to: Click Browse and then choose a new destination if you want to save the file somewhere else. Click Save to save the changes Reboot ... -
Page 22: Network Settings
Upgrade. Status: Shows the status in firmware upgrade. TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your camera. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1. If a firmware upgrade is available, download the firmware to your computer. 2. Unzip the file to a folder on your computer. ... -
Page 23: Port
TRENDnet User’s Guide TV‐IP325PI Port Network Interface MAC Address: Click this button to reboot this camera. You can change the service port numbers of TV‐IP325PI and enable/disable Duplex and Choose one of the Ethernet duplex and speed to RTSP or HTTPS services. Speed: match your network. Default: auto. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet. Primary DNS: Enter your first IPv4 or IPv6 DNS server address Secondary DNS: Enter your second IPv4 or IPv6 DNS server address IPv4 Port Numbers DHCP: Check this box if the IP address is assigned by DHCP HTTP Port: The default web access port. You can change the port server. number. However, you cannot disable the web ... -
Page 24: Ddns
TRENDnet User’s Guide TV‐IP325PI DDNS 802.1X Dynamic Domain Name Service, DDNS, allows you to find your camera from Setup 802.1X for remote authentication service. the Internet with an easy to remember domain name. 802.1X Authentication DDNS Enable IEEE Check this box to enable 802.1X authentication Enable DDNS: Check this box to enable DDNS Service. service. 802.1X: DDNS Type: Select a DDNS service provider. EAPOL version: Extensible Authentication Protocol (EAP) over LAN (EAPoL). Choose version 1 or 2. This version number has to match to your 802.1X service EAPOL version. User Name: Enter the account name. Server Address: Enter the DDNS server address. ... -
Page 25: Quality Of Service (Qos)
TRENDnet User’s Guide TV‐IP325PI Quality of Service (QoS) UPnP Setup traffic prioritization tags the video packets to go through network Universal Plug‐and‐Play is a device discovery protocol set. It allows your switches and routers with assigned priority. You can set the Differentiated camera to easily be found, for example, on a Windows operation system. Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities. The meaning of the value is different in different DiffServ domains. Consult your network manager for the setup details. UPnP Enable UPnP: Check this box to enable UPnP connection. IP Address Filter Friendly Name: The name that will be appeared when searched. ... -
Page 26: Video Settings
TRENDnet User’s Guide TV‐IP325PI Video Settings Resolution: H.264/H.265 MJPEG Video Format Bitrate Type: Choose between variable bit rate or constant bit rate for video compression. The default is variable rate. Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max. Bitrate: Choose the maximum video sampling bit rate. Default: 2048 I Frame Interval An I Frame is a frame that records a complete picture. Frames between I frames, (P frame or B frame) only records the image differences between two frames. Choose the I Frame Interval here. The default is 60. Click Save to save the changes Sub stream can be used for lower resolution needed application, for example mobile app streaming or NVR streaming. Third stream is used for Live view only, it has resolution limitation on Chrome, Firefox and Safari. Max resolution can be supported under Internet Explorer. Video Encoding: Choose the video stream you want to modify. ... -
Page 27: Display Settings
TRENDnet User’s Guide TV‐IP325PI Display Settings Brightness: Use the slider or enter a number (0‐100) to adjust the image brightness. Default: 50 Contrast: Use the slider or enter a number (0‐100) to adjust the Adjust video image quality, lightness, and color settings here. image contrast. Default: 50 Saturation: Use the slider or enter a number (0‐100) to adjust the color saturation. The greater number means the color will be more saturated. Default: 50 Sharpness: Use the slider or enter a number (0‐100) to adjust the image sharpness. Default: 50 Light sensitivities Iris Mode: This camera uses fixed lens, therefore the Iris function is not configurable. Exposure Time: Adjust this value for exposure time for each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture. Gain This value be manually configured from 0 to 100. The bigger the value is, the brighter would the image be, and the noise would also be amplified to a larger extent. Day/Night Choose whether you want the Switch: camera to be set to the day mode (color video) or night mode (IR enhanced black/white video). You can manually set it to day mode or ... - Page 28 TRENDnet User’s Guide TV‐IP325PI Switch Time: The time delayed to switch between White Balance: modes. Longer switch time can prevent unnecessary mode flipping if an object is blocking the light source temporarily. Range: 5‐120 seconds, default: 5 seconds. Schedule: Use quick selection or enter the time down below. Click OK to confirm the time you want to set. Choose a color temperature as the white color and compensate the color on the whole image. Digital Noise Choose the mode of noise reduction. Reduction: Normal Mode Noise Reduction Level: Adjust the effect of digital noise reduction. Range: 0‐100%, default : 100% Start Time: The start time for day mode. Expert Mode Stop Time: The start time for day mode. Space DNR Level: Adjust the special digital noise ...
- Page 29 TRENDnet User’s Guide TV‐IP325PI (Scheduled‐Switch mode) Rotate To make a complete use of the 16:9 aspect ratio, you can enable the rotate function when you use the camera in a narrow view scene. When installing, turn the camera to the 90 degrees or rotate the 3‐axis lens to 90 degrees, and set the rotate mode as on, you will get a normal view of the scene with 9:16 aspect ratio to ignore the needless information such as the wall, and get more meaningful information of the scene. Scene Mode Choose the scene as indoor or outdoor according to ...
-
Page 30: On Screen Display Settings
TRENDnet User’s Guide TV‐IP325PI To configure this section On Screen Display Settings 1. Click the calendar icon to select the start time and the end time. Display the camera name and the time the video is shooting on the screen • The start time and end time refer to the valid time for day mode. • The time period can start and end on two days in a row. For example, if you set start time as 10:00 and end time as 1:00, the day mode will be activated at 10 o'clock in the morning and stopped at 1 o'clock early in the next morning. 2. Click Working mode to configure common parameters applicable to the day mode and night mode. 3. Click Day tab to configure the parameters applicable for day mode. 4. Click Night tab to configure the parameters applicable for night mode. Note: The settings are saved automatically when parameters are changed. Display Check this box to display the product name that was Name: setup in the device settings Display Date: Check this box to display system time. Display Week: Check this box to display time of the week. Time Format: Select 12 or 24‐hour time format. Date Format: Select the date format ... -
Page 31: Text Overlay
TRENDnet User’s Guide TV‐IP325PI Text Overlay Privacy Mask Display extra information on the screen over the image. Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Check Box: Check this box to enable text overlay. Text Field: Enter the text you want to display. You can enter your local language if you want. The text field allows maximum 44 English letters or 20 non‐English ... -
Page 32: Events
TRENDnet User’s Guide TV‐IP325PI Events Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered. Enable Check this box to enable motion detection. Click Save Motion to save the choice. Detection: Enable Check this box to enable motion tracking. Motion Motion tracking is a dynamic display that shows the current Tracking: status of motion detection. The motion tracking is ... - Page 33 TRENDnet User’s Guide TV‐IP325PI Draw Area: Click Draw Area button to start drawing. Click and 3. Set the time period and the event you want drag on the area you want to set up the motion to trigger the video recording continuous detection. You can draw up to 8 different areas. Click (always recording) or motion detection. Stop Drawing to stop drawing motion detection 4. Click Select All or the weekday you want to areas. have the same schedule on different day. ...
-
Page 34: Video Tampering
TRENDnet User’s Guide TV‐IP325PI Video Tampering This is to detect if the camera has been tampered with and surveillance is compromised. You can set up tamper proof notifications to alert the system manager to check the camera. Enable Check this box to enable tamper detection. Click Save Tamper to save the settings. Detection: Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the tamper detection. You can setup only one area for tamper detection. Click Stop Drawing to stop drawing motion detection areas. The gray block represents the detection area. Sensitivity: Move the slider to adjust detection sensitivity. Clear All: Click this button to clear all the set up areas. © Copyright 2018 TRENDnet. All Rights Reserved. 34 ... -
Page 35: Notification
TRENDnet User’s Guide TV‐IP325PI Notification Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Provide notifications for other system events, set up your notifications here. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous Notification (always recording) or motion detection. Notification First, choose the exception type, and then choose 4. Click Select All or the weekday you want to Type: the corresponding action. have the same schedule on different day. Send Email: Check this box to send an e‐mail notification when 5. Click another day of the week by clicking on ... -
Page 36: Snapshot
TRENDnet User’s Guide TV‐IP325PI Snapshot Event triggered Enable: Check this box to take snapshots when an event is occurred. You can set up your camera to continuously taking snapshots or taking Format: Save snapshots in JPEG format snapshots only when events happening. Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of ... -
Page 37: Email
TRENDnet User’s Guide TV‐IP325PI Email Enable SSL: Check this box if your service provider requires a SSL secured connection. Attach Check Attach Image if you want to send a snapshot Set up email accounts for notifications. Image/Interval: image with the email notification and select the interval of snapshots in seconds. Authentication: Check this box if your server requires a password in order to send email. Most email servers require authentication when sending an email. User name: Enter the user name of outgoing email account Password: Enter the password Confirm: Enter the password again to confirm that the ... - Page 38 TRENDnet User’s Guide TV‐IP325PI Port: Enter the service port number of the FTP server. User Check Anonymous if the FTP server does not require Name/Anonymous authentication. Enter the User Name if the FTP : server requires authentication. Password: Enter the password of the FTP account. Confirm: Enter the password again to make sure the password was entered correctly. Directory When saving snapshots on an FTP server, they can Structure: be saved in a single place or organized with meaningful directory names. Save in root directory: You can choose to store all files in the same folder of FTP login. Save in directory: Structure your folders with camera name or IP address. Directory: Use Camera Name: Use the camera name to organize the saved files. Use Camera IP: Use the camera IP address to organize the saved files. Click Save to save the changes ...
-
Page 39: Appendix
TRENDnet User’s Guide TV‐IP325PI FCC Caution: Any changes or modifications not expressly approved by the Appendix party responsible for compliance could void the user’s authority to operate this equipment. Direct video access ‐ RTSP This device complies with Part 15 of the FCC Rules. Operation is subject to the To access the video directly through RTSP, just visit the camera IP address on following two conditions: (1) This device may not cause harmful interference, port 554 by default. For example: 192.168.10.30:554 use the admin or user and (2) this device must accept any interference received, including password the login. interference that may cause undesired operation. Regulations Federal Communication Commission Interference Statement IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a ... - Page 40 TRENDnet User’s Guide TV‐IP325PI Europe – EU Declaration of Conformity Français [French] Par la présente TRENDnet déclare que l'appareil TV‐IP325PI est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2004/108/CE, 2006/95/CE et. This device complies with the essential requirements of the Directive Italiano[Italian] Con la presente TRENDnet dichiara che questo TV‐IP325PI è conforme ai requisiti essenziali ed alle altre disposizioni 2004/108/EC and 2006/95/EC. The following test methods have been applied pertinenti stabilite dalla direttiva 2004/108/CE e 2006/95/CE. in order to prove presumption of conformity with the essential requirements Latviski [Latvian] AršoTRENDnetdeklarē, ka TV‐IP325PI atbilstDirektīvas of the Directive 2004/108/EC and 2006/95/EC: 2004/108/EK un 2006/95/EK būtiskajāmprasībām un citiemar to saistītajiemnoteikumiem. Safety /EMC Lietuvių Šiuo TRENDnet deklaruoja, kad šis TV‐IP325PI atitinka esminius EN 60950‐1: 2006 + A11: 2010 + A12: 2011 + A2: 2013 [Lithuanian] reikalavimus ir kitas 2004/108/EB ir 2006/95/EB Direktyvos EN 55024: 2010 + A1: 2015 nuostatas. ...
- Page 41 LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO products that are replaced become the property of TRENDnet. Replacement products EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN may be new or reconditioned. TRENDnet does not issue refunds or credit. Please CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, contact the point‐of purchase for their return policies. INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE TRENDnet shall not be responsible for any software, firmware, information, or ...
- Page 42 ...
Need help?
Do you have a question about the TV-IP325PI and is the answer not in the manual?
Questions and answers