Elvox 46340.F04 Operation Manual page 17

CCTV
Step 3: Enable sensor alarm (Please specify to channel), select senor type and click 'Apply' to save settings.
Step 4: Enter into Menu Setup Alarm Sensor Schedule tab to bring up schedule settings for sensor alarm. The
setup steps are similar to normal schedule setup. You can refer to 7.2 Schedule Recording for details.
Note: The timelines of the two schedules must match, otherwise you cannot get the record in some time.
8. Playback
This unit supports four kinds of playback
8.1 Live Playback
Click Play button on the main menu bar to playback the record. User can do concrete operation by clicking the
buttons on screen.
8.2 Playback by Time Search
Step 1: Enter into Menu Search Time Search tab.
Step 2: Select date and channels on the right hand side and press "Search" button. A date with highlighted borderline
indicates presence of data.
Step 3: Set the start time by clicking a particular grid or by entering the specific value in the start time field.
Step 4: Select the channel display mode and click
playback.
17
button to play record. Use the playback toolbar to control the
EN