Hardware Installations - Elvox 46340.F04 Operation Manual

CCTV

1. Hardware installations

1.1 Install Hard Drive
Notice: 1.This series support eight SATA hard drives. Please use the hard drive the manufacturers recommend
specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting.
Step1: Unscrew and Open the top cover
Step2: Connect the power and data cables. Place the HDD onto the bottom case as the following picture.
Step3: Screw the HDD
Note: For the convenience to install, please connect the power and data cables firstly, and then screw to fix.
1.2 Install DVD Writer
Step1: Unscrew and Open the top cover.
Step2: Unscrew and take the barrier out of the front panel. Then connect the power and data cables. Finally, put the
DVD with the holder into the case, let the screw holes of the case aim at the holder's and screw them firmly.
2. Connections
2.1 Rear view for 4-ch DVR
1
Relay Output. Connect to external alarm
2
Connect to external sensor
3
Connect to speed dome. Y is TX+, Z is TX-
4
Connect to keyboard. A is TX+, B is TX-
5
HD SDI video signal inputs
6
Connect to high-definition display device
7
VGA output, connect to monitor
11
8
Network port
Connect USB mouse or connect external
9
USB devices
10
CVBS output
11
Audio output, connect to the sound box
12
Talk. Connect to microphone
13
Audio input
14
Connect to HDD for backup.
EN