Main Menu Setup - Elvox 46340.F04 Operation Manual

CCTV
Click 'Next' button. This will take you to record setup window.
Select resolution, fps, encode, quality and bitrate. The higher the value is, the clearer the recorded picture is. Of course,
more space of HDD will be taken up.
Click 'Next' button. This will take you to the HDD management window.
You can check your HDD information through this tab. If your HDD was recently installed, select the HDD from the list to
format it.
Click 'Next' button. This will let you to see your DVR status. And then Click 'Finish' button to end this wizard.
You can also refer to the complete setup steps from the relevant sections of DVR User Manual. If you don't want to
setup Wizard, please click Exit button to exit.
5. Login
After you exit the wizard setup, you can login to the DVR.
Notice: This DVR can only display options on either VGA/HDMI monitor or BNC monitor at a given point of
time, if there is live image display without menu options ， please check if there is display on other
device/monitor, or long press ESC/Fn key to wait for login dialog box to appear. Long press ESC/Fn key can
switch the output between BNC and VGA/HDMI.
Click the MENU button to bring the LOGIN dialogue box and enter the user name: admin and password: 123456

6. Main menu setup

Click right mouse, or press ENTER button on the front panel to enter into the main menu. Then click Setup to enter into
Setup interface as shown below
14
EN