Shift Lever; Lights - BMW R 1200 GS Adventure Rider's Manual

Shift lever

4
Adjusting shift lever
56
z
Slacken screw 1.
Turn foot piece 2 into de-
sired position.
A foot piece adjusted
too high or too low
can cause problems when
shifting. If you have problems
shifting, consult a certified
workshop, preferably an
authorized BMW Motorrad
dealer.
Tighten screw 1 to appropri-
ate torque.
Foot piece on gearshift
lever
6 lb/ft (8 Nm)

Lights

Switching on side lights
The side lights switch on au-
tomatically when the ignition
is switched on.
The parking lights are a
strain on the battery. Do
not leave the ignition switched
on longer than absolutely
necessary.
Switching on low-beam
headlight
The low-beam headlight
switches on automatically
when you start the engine.
With the engine switched
off, you can switch on
the lights by switching on the
high-beam headlight with the
ignition switched on or by op-
erating the headlight flasher.
Switching on high-beam
headlight
Press top part of switch 1
for high-beam headlight.
The high-beam headlight is
switched on.
Move switch 1 for high-
beam headlight to center
position.
High-beam headlight
switched off.