BMW R 1200 GS Adventure Rider's Manual page 113

cialized workshop, preferably
an authorized BMW Motorrad
retailer.
During the following
work, parts of the front
brake, and in particular of the
BMW Integral ABS, can be
damaged.
Take care not to damage the
brake system, in particular the
ABS sensor with cable and
the ABS sensor ring.
The front wheel must be
installed right way round
to rotate in the correct direc-
tion.
Observe the direction of rota-
tion arrows on the tires or on
the rim.
When installing wheel, make
sure not to damage brake
lines, brake disks, brake
pads and rim.
with OE BMW Motorrad
Integral ABS:
When installing wheel, make
sure that ABS sensor cable,
ABS sensor wheel and ABS
sensor are not damaged.
Insert spacer bushing 9 into
wheel hub.
Roll front wheel into front
forks.
Raise front wheel, install
quick-release axle 8 and
tighten to appropriate
torque.
Quick-release axle in
axle mount
37 lb/ft (50 Nm)
Tighten axle clamping
screw 7 with appropriate
torque.
Clamping screw for
quick-release axle
14 lb/ft (19 Nm)
7
111
z