Case lock is unlocked.
6
92
Press in latch 2 as far as
possible while holding case
z
in place.
Latch is open.
On longer drives, left
case and case carrier
may become hot.
Allow case and case carrier
to cool down before removing
case.
Pull case forward as far as
possible and remove toward
outside.
Mounting case
Place case on lower strut
of case carrier so that
hooks 4 are located before
mounts 3.
Swivel case by upper
strut, slide toward rear into
mounts and hold.
Press latch 2 outward as far
as possible.
Latch engages with an audi-
ble click.
Turn key 1 clockwise.
Case lock is locked.