Make sure that the throttle
valve cable is seated in the
guide 4 of the intake mani-
fold and the throttle valve is
resting against the stop.
Insert knee cover into
bracket 3.
Install screws 2 and 1.
Insert side cover 2 into
brackets 3 and 4.
Install screw 1.
Installing right side panel
(
126)
Installing driver's seat
(
61)
Removing right side
panel
Make sure ground is level
and firm and place motorcy-
cle on its center stand.
Removing driver's seat
(
61)
Remove the screw 1.
Remove screw 2 on inside.
7
125
z